What is FoxFlash Master ECU Programmer

1. OBD mode: (read the data from Diagnostic port ,you need remove the ecu or tcu from car or open the ecu box , just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it )

2. BENCH mode: we also call it service mode,  you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can  clone tcu and chiptuning with this mode.

3. Jtag mode: open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write .

4. Boot mode: open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.

5. Full system : you can read and write by pinout for most of ecu and tcu

6. BDM mode: some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it

Support Winols damaos

As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.

Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.

Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.

Support Vehicle Types: 

AUTO
CAMION
TRATTORI
MOTO
MARINE
BIKE
CAMBI AUTOMATICI

Product Functions:

Learn more: https://www.chinaobd2.com/wholesale/foxflash-ecu-programmer-7842.html