When you replace new steering angle sensor you need to initialize it,otherwise you will get B1168F2 DTC.In this instruction, chinaobd2.com show you guide on how to use Launch X431 device to solve B1168F2 trouble code. And for more about VW repair,please refer to Volkswagen trouble repair.
Device Requires:
LAUNCH X431 IMMO (Chinaobd2 Official Shop)
Procedure:
Connect Launch X431 device to VW Passat 2019,run Launch X431 device to do systems scan
Steering Angle Sensor-No Initialization
Select “Guided Functions”
Press “Start”
Select “Power Steering”—“Guided Function”
Select “Basic Setting Steering Angle Sender-G85”
Start engine and press “Continue/Complete”
Turn steering until the first mechanical end stop is contacted.
The sequence left/right is insignificant.
Turn steering until the other Mechanical end stop is contacted.
Turn the steering back to its center position
Check yellow warn.
Lamp in instrument cluster.
Warn lamp in instrument cluster must extinguish.
Did the warning lamp extinguish.
Press “Yes”
The initialization of the steering sensor-G85 was successfully performed
Now just back to scan DTCs in all system,you will find B1168F2 disappeared.
More test report about Launch X431 please check:Launch X431 Test Report
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: Launch Launch X431 VW X431
Related Posts
Super Dprog5 IMMO Odometer Airbag Reset Tool 3 in 1 for BMW Benz and VAG vehicle...
2018.12.17
Toyota Vios 2014 C1515 Torque Sensor Adjustment by Launch X431
2023.04.4
Choosing the Right Professional OBD II Scanner: Autel MS908S Pro II vs. Launch X...
2024.01.24
Launch DIY Code Reader CReader 8001 CR8001 Full OBD2 Scanner with Oil Resets Ser...
2018.12.17
How to Register New Nissan X-Trail ECM VIN by Launch X-431 Pad7
2024.01.28
BMW X3 E83 Steering Angle Calibration by Launch X431
2019.07.14
VAG Dash CAN V5.14
2018.12.17
Launch CReader 5001 Code Reader Full OBDII/EOBD Diagnostic Functions Scan Tool
2018.12.17
Launch DIY Scanner CReader 9081 CR9081 Full OBD2 Scanner+ABS+SRS+Oil+EPB+BMS+SAS...
2018.12.17
Original Autek IKey820 Key Programmer Universal Car OBD Key Programmer
2018.12.27