This article show the guide on how to use VCP System to unlock and lock VW electronic handbrake.Hope it helps!
Preparations:
How to Install VCP System Diagnostic Tool Software
VCP System Professional Diagnostic Tool Software Download
Vehicle Supported:
All vehicles equipped with an electronic handbrake (STG53 – parking brake)
Procedures:
Connect VCP System interface to vehicle,then select “Guided functions assistant”
Select “Opening,closing electric handbrake”
The procedure open/closes the brake calipers on vehicles with electric emergency brake.
Conditions:
Ignition on
Before starting the procedure for opening please lock and then unlock the emergency brake.Closing does not require and additional action before starting.
It should be important to ensure that the communication was maintained between the VCP program and the car during the procedure.Noise (Low battery,cable damage etc) can result in damage to the control modules.
Here you can select additional options
Here you need select car models “Passat,Tiguan,Audi A6,Audi A7”,click “Next” to start processing.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
BMW ITool Radar Free Download and Installation
2019.02.24
How to install the software of xprog m ecu programmer?
2019.02.26
How to install gm mdi software
2024.01.28
How to do BMW engine re-adaptation using ISTA D or ISTA+
2019.12.26
XPROG V6.12 vs. XPROG V5.84: adds new adapters / authorization, new PCB
2019.12.13
How to install v17.04.27 wiTECH Micropod 2
2023.12.31
How to Initialize Nissan TEANA Window and Sunroof Configuration
2019.08.7
Perkins EST Software Perform ECM Flash for 404F-22T Engine
2020.08.27
BMWAiCoder 5.0 4.6 4.4 Free Download
2019.03.1
How to Disable Secure Boot for Windows 10 Operations System
2023.04.4