Land Rover KVM (MC9S12XEQ384 112Pin) IMMO has solution now ,it is Yanhua Mini ACDP plus one mobile phone or a PC.
Device and module to use:
- Yanhua Mini ACDPwith OBP+ ICP adapter.
Image source
- Land Rover KVM module and authorization
3. BDM adapter
4. BAV key adapter
5. Blank key
6. One mobile phone or a PC
IOS system
1) System Version: 9.0 or more
2) Cell phone Models: iphone6 or more
3) Running Memory RAM:> 2G
4) Storage Space ROM:> 1.5G 3)
Android System:
1) System Version: 5.0 or more
2) Running Memory RAM:> 2G
3) Storage Space ROM:> 1.5G
- Bluetooth and WIFI
*Related help files
Yanhua Mini ACDP IOS App Installation Instruction
Yanhua Mini ACDP Android App Installation InstructionYanhua Mini ACDP IOS Version Import Data to PC InstructionYanhua Mini ACDP Android Version Import Data to PC Instruction
How to use Yanhua ACDP add new key for Land Rover KVM MC9S12XEQ384_3M25J?
Follow the guide to connect Yanhua ACDP basic module and Land Rover KVM module.
In the left rear of the car, open the plaque, see the fuse box, remove the fuse box and see the RAF smart computer
Connect Yanhua ACDP to OBP+ ICP adapter, then to BDM adapter, then to KVM adapter. Wait the indicator turn red then green.
Click on “LandRover” option.
Click on ” KVM (MC9S12XEQ384 112Pin)”.
Click on “IMMO”.
Come to the main menu:
MC9S12XEQ384_0M12S
MC9S12XEQ384_1M12S
MC9S12XEQ384_2M25J
MC9S12XEQ384_3M25J
Choose ” MC9S12XEQ384_3M25J”
Click on ” Add key auto mode”
Starting application.
Device connection succeed.
Note: Please prepare the OBP+ICP adapter, BDM adapter, KVM module, BAV adapter and Blank key.
Follow the tip to ensure the well connected for ACDP device, OBP +ICP adapter, BDM adapter and KVM module.
Detecting pins status, please wait..
Good contact and continue.
Configuring adapter, please wait…
It is detected the KVM module chip has been encrypted, whether to continue? click on “Continue”.
Configuring adapter, please wait…
Decrypting the chip, please wait… It will take several minutes.
Reading chip PFLASH data, please wait…
Please save the original PFLASH data of the KVM module.
Uploading data…
File save path.
Reading chip EEPROM /PFLASH data, please wait…
Please save the original EEPROM data of the KVM module.
Just click “Yes” until you see the immo info shown as below.
Just follow the on-screen instruction to do ……
Please choose to add the keyway.
Choose key 6.
…
Just follow the on-screen instruction to operate.
One more time, it will show “Decrypting the chip, please wait… ” and it will take several minutes again.
Next is writing chip EEPROM /Plash data, please wait…
Checking chip data, please wait.
Adding the key complete. Please install the KVM module to the car and confirm that the new key can be used normally.
Done.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: adapter bdm BDM adapter cat CDP EEPROM EPROM immo key Land Rover original smart Yanhua ACDP Yanhua Mini ACDP
Related Posts
BMW ID7 iDrive7:How to Build Connect iPhone to Apple CarPlay
2019.05.14
What’s New in Xprog M V5.84 Box Programmer?
2019.03.1
General Motors GM LAAM EPC Free Download
2019.07.24
How to Remove and Disassemble Instrument Cluster for BMW Z3
2019.05.31
OBD2 Cable With Led Red Head for Multidiag TCS CDP+ DS-150 Multi Vehicle Diag
2018.12.17
Mitsubishi ASA EPC Electronic Parts Catalogue Free Download
2019.07.13
Jeep Cherokee RKE Remote Keyless Entry Programming by Launch X431
2019.03.25
Diamond Logic® Builder Moving Signals to Different Connector Pin Locations
2019.06.10
CG Pro 9S12 Read BMW CAS4 Data without Removing Components
2020.05.7
V48.88 SBB Pro2 Key Programmer Support Cars to Year 2017
2018.12.17