When you get errors like picture as bellowing to use super MB pro M6 , how to do next ?
Please check the steps as following :
1.Go to SDconnect Toolkit>> SDconnect Toolkit>>bin
Replace “ToolkitApiDll.dll” and “VersionLoader.dll”
2.Right-click Wi-Fi icon, select “Open Network & Internet settings”
Click “Change adapter options”
Right-click “vEthernet (Default Switch)” and select “Properties”
3.Open “Internet Protocol Version 4 (TCP/IPv4)” properties
Tick “Use the following IP address”, enter “172.29.127.44” on IP address and “255.255.0.0” on “Subnet mask”
More request , welcome to check https://www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: adapter
Related Posts
OBDeleven VW Golf GTI 2013 Window Remote Coding Guide
2019.02.24
How to Setup Caterpillar CAT ET Diagnostic Adapter 3,II,I
2019.07.24
Iprog+ Programmer Iprog Pro Programmer 2019 latest version Software free downloa...
2019.04.25
(Fixed) Digimaster3 correct mileage on 2014 Hyundai Sonata failure
2019.03.18
How to Repair BMW E46 AUC Sensor ZKE unit with Xprog M V5.84
2019.03.1
CNH EST DPA5 Diagnostic Adapter Firmware Update Guide
2023.04.3
How to Use Cat ET and Cat 478-0235 Adapter 3 to Do ECM Clearing for Caterpillar
2024.01.24
How to Setup CAT ET Work with Nexiq USB Link2
2023.05.13
What is FoxFlash Master ECU Programmer
2023.03.8
AURO IM100 All Key Lost Programming for Volkswagen Passat B6
2019.07.26