Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
What is FCOM Diagnostic Software?
Ford FCOM is a diagnostic software for Ford vehicle,it It works as well with Ford subsidiaries vehicles such as Mazda, Lincoln, Mercury, Jaguar, but without guarantee of 100% functionality.It can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values and perform actuator tests.
FCOM Functions:
- ECU Identification
- Fault code (DTC) reading
- Fault code clearing
- Measured values / live data
- Live data recording
- Diagnostic protocol printing
- Actuator tests
- Commands / Coding
- Configuration (This Post: FCOM Ford OBD2 Diagnostic Software Introduction From ChinaOBD2 Official Blog
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!Tags: cat diagnostic software Ford Jaguar Land Rover lish Mazda OBD2 Range Rover smart
Related Posts
Best key programmer: Obdstar DP Plus vs Lonsdor K518 vs Autel IM608
2019.12.16
WinOLS Disable/Close FAP and DPF for EDC16C34
2019.07.22
How to install DRBIII Emulator for Micropod 2 on Windows 7 Pro 32-bit
2019.12.20
Toyota Corolla 2013+ Keyless Go All Keys Lost Programming by Zed-Full
2019.07.31
Yanhua ACDP2 Correct Mileage for Toyota R7F714xx ODO/Buick BCM (NEC3558)
2024.12.24
How to Solve SVCI 2020
2020.01.4
SVCI 2020 (FVDI) abrites commander software Free download
2019.12.20
Benz W222 HU5 Video In Motion Coding by Vediamo
2019.05.31
How to Disable Secure Boot for Windows 10 Operations System
2023.04.4
Review: Micropod2 Clone + DRB3 on 2005 SRT6 Coupe and 2007 LTD Roadster
2019.12.20