When you perform CVT or ECU replacement for Toyota CVT,you need to do CVT fluid pressure learning.So here i want to share the guide on how to use Launch X431 to do Ford CVT fluid pressure learning.
And for more Launch X431 Test Case,check here:How to use Launch X431
Procedures:
Connect Launch X431 to vehicle and enter the menu:
Toyota V48.31–>16 PIN DLC(Europe and Other)–>Manually Select–>ACA–>Other–>Up to 08/2010,then select “CVT fluid pressure learn”
Click “OK” to continue
Start to perform CVT fluid pressure learning.
Note:Ignition OFF,then start engine to perform this operation
CVT fluid pressure learning completed.
Select [OK] button
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: Ford Launch Launch X431 X431
Related Posts
Launch DIY Scanner CReader 9081 CR9081 Full OBD2 Scanner+ABS+SRS+Oil+EPB+BMS+SAS...
2018.12.17
Launch X431 Reset Audi A6L Service Lamp and Service Interval Set
2019.03.21
Launch X431 Pro Mini Bluetooth With 2 Years Free Update Online Powerful Than Dia...
2018.12.17
DELCO E39 ECU Clone by Launch X431 IMMO Pro
2023.05.26
Airbag Reset Tool Comparison: CGDI CG70 vs. OBDSTAR P50
2023.04.1
How to Register New Nissan X-Trail ECM VIN by Launch X-431 Pad7
2024.01.28
2023C Latest Version CAT Caterpillar ET Diagnostic Adapter III Cat Communication...
2024.01.24
How to Use Launch Thinkdiag ?
2024.01.28
What is DiagZone Pro software?
2023.04.22
How to Repair Audi A6 Idle Speed Exceeds Limit After Throttle Cleaned
2019.03.11