Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Here I want to share the guide on how install Nissan Consult 3 plus diagnostic software.And here collect some different version installation method.The installation methods of different Consult 3 may be similar,if there here is no version that you have or you have higher version,please try to install it referring to these method by yourself.
Preparations:
Nissan Consult 3 Plus Software Download
Nissan Consult 3 Plus Clone Interface
Nissan Consult 3 Plus V72.13 installation:
Step 1:Click Consult-iii-* setup.exe
Step 2: Just show Nissan Consult III Setup Wizard
Step 3: Choose the installation path of Consult III
Step 4: click Install Consult III software
Step 5: wait for the Installshield Wizar
Step 6: Choose: accept the terms of Nissan Consult License agreement
Step 7: Choose North America market(NAM), click next
Step 8: Choose North America Step 9: choose U.S.A
Step 10: you also can choose others language
Step 11: the installation of Consult – III software succeeded
The installation guide of Nissan Consult III USB drive Connect the Consult III firmware with your pc by USB cables, and connect the Consult III hardware with your car via OBD-II 16pin diagnostic plug, supply 12V power to Consult III firmware.
Step 1: Found New hardware( Nissan Consult III) Wizard, choose “Yes, this time only”
Step 2: Choose Install the Consult III software automatically
Step 3: Choose JCI-iB-Alliance vehicle interface, just click next
Step 4: just click finish, completing Consult III hardware drive installation
How to Crack Nissan Consult III software, and configure Consult III software
Step 1: Open Consult III software on desktop
Step 2: perhaps show these error: there are no registered VI/MI, please contact your administrator, just ignore, click “OK”
Step 3: click “SUB” button
Step 4: click Administrator setting
Step 5: input Consult III Password — nissanconsult3
Step 6: Choose VIMI registration Step 7: Input Consult III VI serial number: 926573, and click: set Step 8: Click the home button
Step 9: then click: “Connect” button
Step 10: the Consult III will found hardware, show: checking the firmware version Step 11: choose the Function of Consult III software, just enjoy it
Nissan Consult 3 Plus V9.21.01 installation:
1.Open Consult III CD, click “consult iii setup.exe”.
2.Click “Next”.
3.Setup will install Nissan Consult III into the following folder. To continue, click “Next”. If you would like to select a different folder, click Browse.
4.Click “Install”.
5.Installing, please wait…
6.InstallShield Wizard
7.Tick before “I accept the terms of the license agreement, then click “Next”.
8.Select your market, it is available with Domestic market (DOM), North America Market (NAM), Europe Market (EUR) and Global Market(GOM), then click “Next”.
9.Select your area.
10.Select your country
11.Select the application language ( Language available with: English, Finnish, French, German, Greek, Italian, Japanese, Spanish, Chinese traditional, Chinese Simplified, Russian)
12.Click Next
13.Installing
14.The installation of Consult-III software succeeded, click “Finish”.
15.Click Finish to exit Setup.
16. Found New Hardware Wizard, tick before “Yes, this time only” and then click “Next”.
17.Tick before “Install the software automatically (Recommended) and then Click “Next”
18.Select “JCI-1B-Aliance Vehicle Interface and then click “Next”.
19.Completing the Found New Hardware Wizard, click “Finish”.
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat diagnostic software lish Nissan Nissan Consult
Related Posts
VCDS Perform Audi A4 ABS Coding Guide
2019.02.24
New Arrival T300 T300+ Key Programmer English Version Black
2018.12.25
2019 2018 TecDoc EPC Spare Part Catalog Free Download
2019.05.31
How to Use FCOM Diagnose Vehicles
2019.05.31
How to Install/Setup Volvo II 88890400 on Laptop
2024.06.7
International A26 Engine Change Oil Service Interval Overview
2019.07.31
ICOM A2+B+C For BMW Diagnostic & Programming Tool With ISTA-D 4.12.12 ISTA-...
2018.12.17
How to Install FCOM Diagnostic Software on Window/Linux
2019.05.14
What Software You Need for Your BMW-Diagnosis,Coding,Flashing
2023.04.4
Only US$155.00 NEXIQ USB Link Truck Scanner tool for Vietnam Valid untill 2019/2...
2019.02.18
ihave installed CS3+ 0n my Dell lattitude D630 computer having PCIMC slot with the security card. but it didnot detect CS3+ VI-2 i have done everything as per the instructions provide by the manufacturer.I used USB connection as well as blutooth connection . when i touch
connect button VI2 did not connected to the CS3+ software. Please help me to clear this
issue