This article show the guide on how to use VCP System to unlock and lock VW electronic handbrake.Hope it helps!
Preparations:
How to Install VCP System Diagnostic Tool Software
VCP System Professional Diagnostic Tool Software Download
Vehicle Supported:
All vehicles equipped with an electronic handbrake (STG53 – parking brake)
Procedures:
Connect VCP System interface to vehicle,then select “Guided functions assistant”
Select “Opening,closing electric handbrake”
The procedure open/closes the brake calipers on vehicles with electric emergency brake.
Conditions:
Ignition on
Before starting the procedure for opening please lock and then unlock the emergency brake.Closing does not require and additional action before starting.
It should be important to ensure that the communication was maintained between the VCP program and the car during the procedure.Noise (Low battery,cable damage etc) can result in damage to the control modules.
Here you can select additional options
Here you need select car models “Passat,Tiguan,Audi A6,Audi A7”,click “Next” to start processing.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!