This article show a guide on how to use VVDI Key to program Tata Vista and Manza Remote.
Note:This VVDI Key Tool is India version,VVDI Key Tool American version can not work.
Procedures:
Enter the menu select “Remote”–>”ASIA”–>”TATA”–>”VISTA MANZA 09-15”
Put the remote into the coil
Tab “OK” twice to generate
It will prompt you success
Use the working key to turn on and off ignition 4 times.Indicators will blink to confirm remote matching mode
Press the new remote lock and unlock button simultaneously on each remote to be matched one by one.
And now you can test the new remote on your vehicle.
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
ODIS S Diagnostic Software vs. VCDS
2024.01.28
Bobcat 3450 Utility Vehicle Fuel Injector Removal and Installation Guide
2023.04.6
How To Do GM Control Module Programming With Multiple Diagnostic Interface (MDI/...
2019.12.16
Promotion T300 T300+ Key Programmer For Universal Cars Immobilizer Key Decorder ...
2018.12.17
Cummins inline 5 insite 7.5 USB serial port COM2 and FAQ
2022.07.20
HITACHI ZX-7 Excavator GSM Removal Guide
2023.05.5
Benz DTS Monaco Software Free Download
2019.07.14
H618 Remote Controller Remote Master For Wireless RF Remote Controller
2018.12.17
Toyota Previa MPV Smart Card All Keys Lost Programming Guide
2019.02.24
2019 Lonsdor K518S VS 2017 K518ISE: wins in 3 packages
2019.03.8