How to Setup CAT ET Work with Nexiq USB Link2

If you are a Nexiq USB Link2 users,you know that it can work with many diagnostic software,like CAT ET,Volvo PTT,ISUZU G-IDSS….But you need set correct adapter driver on related software.Here in this instruction chinaobd2.com show you guide on how to set CAT ET diagnostic software work with Nexiq USB Link 2 adapter.

 

Preparations:

Caterpillar ET 2023A 2022A 2019C 2018A Electronic Technician Software Free Download

Nexiq USB Link 2 Adapter

 

Procedures:

Run Caterpillar ET diagnostic software,then click “Stop Connect”

Select “Utilities”à”Preferences”à”Modify”

Select “Communications”à”RP1210 Compliant Device”

Click “Advanced” button

Now here select “USB-Link (1)-NEXIQ Technologies USB-Link 2”

Then click “OK”

Notice:if your connection by WIFI or Bluetooth,please select which you need.

Now it show current RP1210 device is “USB-Link (1)-NEXIQ Technologies USB-Link 2”

Click “OK” to finish setup

 

This Post: How to Setup CAT ET Work with Nexiq USB Link2 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!