BMW ICOM A2+B+C Diagnostic & Programming Professional TOOL With Engineers Software Support Vehicles: For BMW Cars, For BMW Motorcycle, For Rolls-Royce, For Mini Cooper
1.Go to “vehicle management” => “Control unit exchange”
2.Select the exchanged control unit in the “After ” tab and then calculate the measures plan. Then ISTA will automatically include the control unit validation in the measures plan.
3.If ISTA cannot carry out automatic validation, a warning about the absence of control unit validation is displayed.
4.By clicking on the “Next” button, ISTA generates the required ValidationRequest_VIN_xxx.json file and opens a file dialogue to save it. The file needs to be stored and uploaded via DCSnet later.
5.ISTA displays a note confirming that the file was successfully saved. At this point, you can exit the process using the “Cancel” button. After processing the measures plan, the session can be closed.
6.Open DCSnet and select “ECU Validation Service” under “Service”. You can order the ECU validation service through us per VIN.
If the ECU Validation Service Menu is not showing up, please check your Access Roles in DEMS. If the ECU validation Service Role is missing, please contact your DEMS Administrator for getting access to it.
7.Upload the previously generated and downloaded ValidationRequest_VIN17_xxx.json file
8.The System checks the file, and after a few seconds, a new
ValidationRequest_VIN17_xxx_response.json file will be offered for downloading. This is subsequently required by ISTA. Start a new ISTA session
9.In order to import the JSON file, select “ECU Validation” in the “Additional Software” tab.
10.In order to import the validated file, select “Import control unit validation file manually” and confirm with “OK”.
11.Select the file ValidationRequest_VIN17_xxx_response.json in the file dialogue and confirm with “Continue”. (the file will be supplied by us if you ordered the ECU Validation Service from team autosvs.com)
12.The file is written into the vehicle and checked.
More interesting for bmw diagnostic tools , please check www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: abs bmw ICOM A2 ICOM A2+B+C
Related Posts
AK90 Key Programmer AK90+ For All BMW EWS From 1995-2005
2018.12.17
How to Remove & Replace Benz EIS (Electrical Ignition Switch)
2019.03.6
How to do BMW ECU Validation Service with BMW ICOM ISTA ?
2024.01.28
How to update BMW iDrive Software
2019.02.24
How to install the software of xprog m ecu programmer?
2019.02.26
How to Use FORScan:Manual,Reviews,Download
2019.03.7
Original Autel AutoLink AL619 OBDII CAN ABS And SRS Scan Tool Update Online
2018.12.17
Cheap BMW OBD2 reader reviews: Autel AP200, INPA, ISTA / P, Foxwell NT530, C110
2019.12.24
How to use Mini ACDP to read MEV1722 DME ISN?
2019.03.8
FAQs for NEXIQ 125032 USB Link Diesel Truck Diagnostic Tool
2024.01.28