Connecting the NEXIQ First-Link to a smartphone using Bluetooth is a straightforward process. Here’s a step-by-step guide based on your outline:
Preparing to Use the USB-Link 2 (Bluetooth version)
#Preparing to Use the USB-Link 2 (Bluetooth version);
1). Download and install the First-Link Mobile Apps on your Smartphone (iOS/ Android). Free download here.
2). Connect the USB-Link 2 to a Vehicle (refer to Figure 1.1 above).
3). Pair the Device
→Locate the Bluetooth icon on your Smartphone (Available Devices).
→Select the device displayed that matches the Serial Number on the back of your USB-Link 2 (e.g. USBL2-149588). Click Pair (Saved).
→If on Available Devices not shown, you need to push and hold for a second the Bluetooth button below the USB-Link 2, then click refresh.
4). Open the First-Link Mobile Apps on your Smartphone.
How-to-Connect-NEXIQ-First-Link-using-Smartphone-5
→Click SCAN.
→Diagnostic adapter required: Select an adapter.
→Select your model of diagnostic adapter: NEXIQ USB-Link 2.
→Select USBL2-149588 as the default diagnostic adapter. Click YES.
5). Identifying Vehicle: Loading support for Engine/ Transmission J1939 devices.
#Features include:
a). FAULTS
→Active and Inactive fault codes present at the time of connection are displayed.
b). LIFE / TRIP
→Displays trip-specific information related to fuel usage, miles, maximum speed, cruise control speed, hours of operation, etc.
c). VEHICLE SPECS
→Vehicle information including VIN, ECU software and hardware information is displayed.
d). PARAMETERS
→Displays parameters specific to the modules on the vehicle (e.g. Engine, Transmission, etc).
e). REPORT
→Generates a session-specific report containing vehicle information (i.e. Faults, Vehicle Specs, Parameters, and Life/Trip information), can be uploaded to the cloud, emailed, etc.
f). Sharing/ Share Report
→Enables the driver to share vehicle information gathered to dispatch, service providers, etc.
→Download here for example.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
V3.9 CG100 Airbag Restore Devices Support Renesas
2018.12.17
How to do G30 VLD (low beam) coding with ENE cable
2019.12.19
How to use Mini ACDP to read MEV1722 DME ISN?
2019.03.8
How to Remove & Install Wheel Position Sensor for Bobcat Loader
2020.09.16
Nissan Consult 3 Plus BCM Configuration Guide
2019.05.31
BMW E90 NBT EVO Retrofit Guide
2019.02.24
Free Download Op-com Can OBD2 FW 1.99 Opel Diagnostic Tool
2019.03.6
Subaru FAST II EPC Europe 2017 Free Download
2019.07.22
BMW 35160 & 35080 EEPROM Odometer Correction By Yanhua 35xx Emulator
2019.02.24
SmartPRO 5000U-PLUS 5000u Plus Universal USB Programmer PCF29XX Chips Support Li...
2023.06.7