Here chinaobd2.com share the process on how to use FCOM to program/configure trailer module in BCM after trailer module replacement for Ford Focus 2011.
Preparations:
FCOM Ford OBD2 Diagnostic Software Download
How to Install FCOM Diagnostic Software on Window/Linux
Compatible Ford Modules:
Mondeo 2006-2014Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit Connect 2013-, Transit Custom 2013-
Procedures:
After trailer control modules installed,run FCOM software.
Select “Settings” in the Miscellaneous functions
Tick “Development functions” and then click “Save Changes”
Click “Select Control Unit”
Select “BCM-Body Control Module”,then click “Go” to continue
It will take several seconds to build communication to BCM
Select “Configuration”
Select “Control Unit Configuration”,then click “Go” to continue
Communication in progress…
Scroll down the bar to select “Trailer Stability Assist”,then click “Edit”
You are changing “Trailer module” configuration option.Please choose from available options
Select “13-pin socket”,then click “Continue”
Click “Write configuration to ECU”
Now you will get below prompt massage:
“You are going to write new configuration data to the ECU.Please make sure the configure data are valid for the control unit and installed vehicle equipment.Incorrect ECU configuration may damage components (such as actuators or sensor) or control units in the vehicle
It is highly recommended to make backup of configuration data first so as you can revert to original data in case of any problems
Do you really want to continue and program the control unit with new configuration?”
Click “Yes” to continue
Communication in progress…
Configuration was successfully written to the ECU.
Please read fault codes memory to verify that changes did not result in new DTCs.
Also please try to re-read configuration to verify that the ECU has fully accepted the new configuration.
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat Ford OBD2 original program
Related Posts
MAN MANTIS EPC Electronic Parts Catalogue Free Download
2019.08.7
How to Release Ford S-Max/Galaxy EPB Manually
2019.05.13
How to Remove Injectors on a 3406B CAT Engine
2024.01.28
BMW E70 E71 Video In Motion Coding by NCS Expert
2019.06.10
Installation guide for 2019 latest version iProg+ Programmer V76 Software
2019.08.7
Autel MaxiCheck DPF Reset Special Application Diagnostics Update Online
2018.12.17
How to Use Bendix Acom Pro Virtual Truck Connection Function
2023.05.5
International A26 Engine Change Oil Service Interval Overview
2019.07.31
Honda Odyssey 2016 All Key Lost Programmign by Autek iKey820
2023.06.10
How to Repair Lexus LX570 AB60F Transmission Clutch/Brake Damage
2020.09.16