GM Tech2 Scanner VCI, Keypad, CANdi and RS232 Self Test Instructions

Posted on by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Manual: How to do GM Tech 2 clone scanner self test step-by-step

VCI self test

Keypad self test

CANdi self test

RS-232 self test

 

Follow the instruction in detail…

 

Part 1: Tech2 VCI self test

tech2-vci-self-test-1

Insert the GM card

tech2-vci-self-test-2

Connect the adapter and ready for the self test

tech2-vci-self-test-3

Go to the main menu and select F4: Tool options

tech2-vci-self-test-4

F3: Self test

tech2-vci-self-test-5

Exit to continue

tech2-vci-self-test-6

Select the function for self test

tech2-vci-self-test-7

Here, press F2: Automated VCI

tech2-vci-self-test-8

The VCI module self test result

Passed VCI selftest.

 

 

Part 2: GM Tech II Keypad self test

gm-tech2-keypad-test-1

Go to the Tech 2 menu and select F4: Tool options

gm-tech2-keypad-test-2

Then F3: Self test

gm-tech2-keypad-test-3

Before running the Tech 2 self test:
(1) Candi cannot be connected
(2) Aldl loopback should be connected (GM3000109)
(3) Failure to follow these instructions may invalidate the self test

gm-tech2-keypad-test-4

F3: Selectable main pcb

gm-tech2-keypad-test-5

Press Keypad

gm-tech2-keypad-test-6

And press key

gm-tech2-keypad-test-7

Note: In the last image, the actual key pressed is F0 and the final result is PASS – that

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: GM Tech2 Scanner VCI, Keypad, CANdi and RS232 Self Test Instructions From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *