This instruction show you guide on how to update power control unit software for Volvo EC18 Electric.
Preparations:
Volvo Prosis 2023 2022 2019 Free Download
Volvo Techtool 2023 Diagnostic Software
Volvo VOCOM 88890300
Procedures:
NOTE!
This operation needs a personal computer with a Microsoft® Windows® operation system and additional hardware which is available as special tool.
The machine is supported by Tech Tool and furthermore equipped with unsupported control units (Battery Management Unit, Inverter) that have a dependency to each other.
A special program is needed to update and program the software on these control units.
Software download
1.The required software is online available from VOLVO. It can be downloaded from the website by using an Internet browser. Follow the link below.
https://volvogroup.sharepoint.com/sites/coll-goelectric-power-control-software/External Documents/Forms/AllItems.aspx
2.Download the file from a certain directory and save it on the local disc.
3.Install the software on the computer.
Figure 1
Main screen
1.Preferences, to change the settings.
2.Connect, to establish a connection with the interface.
3.User mode, to switch between the access privileges.
Generate a Token
NOTE!
The follow steps and password request should be done at least 2 days before the work activity. 88830653 Cable should be connected to the computer.
1.Connect 88830653 Cable to the computer.
2.Adjust the settings in the software.
Figure 2
Settings
1.Select the protocol, use Arrok
2.Select the USB interface
3.Select the CAN speed, use 250K
4.Select Extended as CAN Type
5.Insert the battery address, use 80h as default
6.Select the battery voltage
7.Insert the quantity of battery packs
8.Locate the file ConfigAlarmArrokFaultGroupCode.cfg
3.Save and apply the settings.
4.Click Connect to establish a connection with the interface.
5.Change from User Mode to Maintenance Mode.
6.Generate a Token
Figure 3
Software upload
1.Select Persistent as Token Type
2.Select Maintenance as usage level
3.Read off the Token. Send the Token by email to the below address and request an ECOM password
customer.nersac@saftbatteries.com
NOTE!
Feedback should be within 24 hours.
4.Insert the password from the feedback email
5.Click on Validate
NOTE!
The received password is required for usage of the software in maintenance mode and is not transferable.
BMU, Software updating
1.Place machine in the service position.
2.Turn the battery disconnect switch to the off position.
3.Remove the upper left cover (2).
Figure 4
Covers
4.Connect the 4 pin connector of the cable to PO3907 at the machine. Use 88830654 Break out harness
5.Connect the black connector (Vehicle) to the adapter cable. Use 88830653 Cable
6.Turn the battery disconnect switch to the on position.
7.Turn the ignition key to the position (I).
8.Run the application ECOM.
Check the settings of the software and adjust as needed. Refer to the section ahead.
Figure 5
Settings
Change from User Mode to Maintenance Mode.
Insert the previously requested password and click on validate.
An overview of the installed software should be displayed.
Figure 6
V1237173
1.Location to an upload file
2.Information on battery packs
Locate the previously downloaded file to upload (1).
Select the battery packs to update
NOTE!
All battery packs should have the same software version.
Select Start to run the software update.
Exit the program after the successful update.
9.Turn the ignition key to the position (0).
10.Turn the battery disconnect switch to the off position.
11.Disconnect the special tools.
12.Install the upper left cover.
For more Volvo excavator repair,please refer to Volvo excavator trouble repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: adapter cat key lish program
Related Posts
12.2022 Benz Xentry.OpenShell.XDOS Diagnostic Software Free Download
2024.01.28
SVDI FVDI 2020 Auto Diagnostic Tool FAQ
2019.12.20
How to Reflash CARPROG MCU AT91SAM7S256 Step by Step
2019.02.24
Jeep Cherokee Powertrain Control Module PCM Initialization Guide
2019.05.14
What is new holland electronic service tool?
2024.01.28
Jeep Cherokee RKE Remote Keyless Entry Programming by Launch X431
2019.03.25
LISHI 2-in-1 Auto Pick And Decoder For Renault
2018.12.17
How to connect between DTS 8.08.12 and XENTRY 3/2019
2019.03.13
2019 Latest Version CGDI AT-200 AT200 BMW ECU Programmer & ISN OBD2 Reader
2019.04.9
Newest Honda HDS V3.102.051 Free Download
2019.02.24