Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Yanhua ACDP Module 34 can be used with Mini ACDP-1 and Mini ACDP-2 for VW MQB RH850/4th generation/MQB 5A & 5C IMMO programming (new key & all keys lost) and mileage correction. No soldering, No need to pry up the chip pins, No capacitor removal. The software comes with pin detection function, making data reading and writing safer and more reliable.
Yanhua Module 34 detailed introduction:
The Module 34 package comes with 9 pieces of bench interface boards and License A609.
Price: $360
If you have Yanhua ACDP Module 33, you can buy this Module 34 at $230. Please send us the serial number of the ACDP.
Main Function:
Support IMMO and mileage correction for the 4th generation instrument with 70F3423+95320 chip model
Support IMMO and mileage correction for D70F3426+95128 chip model MQB 5A instrument
Support IMMO and mileage correction for RH850 series R7F701401, R7F701402, R7F701407 chip model 5A instruments
Support mileage correction for RH850 series R7F701401, R7F701402, R7F701404, R7F701406, R7F701407 chip model 5C instrument
Supported Odometer numbers (not limited to):
R71F701401/R7F701402/R7F7014075A:
83A920700B, 83A920700, 8V0920740B, 81A920740L, 51G920640D, 55G920790, 2GD920790A, 5GD920790, 5NG920640C, 5NG920650C, 5ND920650C, 5NG920654, 2GG920640, 3GB920640,
3GB920790, 56G920790, 3VD920740B
R7F701401/R7F701402/R7F701404/R7F701405/R7F701406/R7F7014075C:
3GB920640A, 3GB920640B, 3GB920640C, 3GD920640D, 19G920640B, 19G920640C, 19D920640B, 19D920640C, 17G920640A, 2GD920640B, 2GD920640C, 5GD920640D, 5ED920860C, 19G920650B, 19G920650C, 55G920650A, 55G920650B, 55G920650C, 5HG920340, 5HG920340A, 5HG920340B, 5HG920340C, 5NG920640D, 5NG920650D, 2GG920640A, 51G920640E
D70F3423+95320:
31G920850B, 18G920860B, 31G920850A, 18G920860A, 31G920850F, 34D920850C, 31G920850C, 34D920850E, 31G920860A, 34D920850G
D70F3426+95128:
5GG920640, 5GG920860, 5GG920860A, 5G0920861A
Yanhua ACDP 2 and Module 34 overall connection diagram
For example:
Install Thumb screw-fastened R7F701402 interface board
1.Find the interface board installation area on the instrument, according to the visual positioning mark on the interface board
2.Find the correct positioning holes of D1 on the instrument
3.Align the interface board with the screw fastener holes and D1 positioning points
4.Press the interface board down with your left hand. Tighten the locking screw with your right hand.
The installation is done
5.Confirm again that the interface board D1 positioning pins are completely aligned with the D1 positioning holes of the instrument
Install Lock fastening R7F701407 interface board
1.Push all PCB lock fastening on the interface board to the unlock position.
Find the MQB Module 34 interface board installation area on the instrument, according to the visual positioning mark on the interface board.
2.Find the correct positioning holes of D1, D2, D3 on the instrument.
3.Check that the D1 and D2 positioning pins are completely aligned with the D1 and D2 positioning holes of the instrument, and ensure that the PCB lock buckle is completely aligned.
4.Finger down pressure interface board, push the PCB lock buckle to the Locked position to lock the interface board, installation is done.
5.Confirm again that the interface board D1, D2, D3 positioning pins are completely aligned with the D1, D2, D3 positioning holes of the instrument
Install Lock fastening (D70F3426) interface board
1.Push the lock fastening of the interface board to the unlock position. Find the interface board installation area on the instrument, according to the visual positioning mark on the interface board.
2.Find the correct positioning holes of D1, D2, D3 and D4 on the instrument
3.Check that the D1 and D2 position pins are completely aligned, with the D1 and D2 positioning holes of the instrument, and ensure that the PCB lock buckle is completely aligned.
4.Finger down pressure interface board, push the PCB lock buckle to the Locked position to lock the interface board, installation is done.
5.Confirm again that the interface board D1, D2, D3, and D4 positioning pins are completely aligned with the D1, D2, D3 and D4 positioning holes of the instrument.
Yanhua Mini ACDP ACDP-2 Module 34 for MQB RH850 IMMO and Mileage Correction:
https://www.chinaobd2.com/vp-yanhua-acdp-module34-for-mqb34.html
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!