VIIPlusLoader 08.021.10(BETA) FULL Installer

Posted on by VCDS
On Sale: Scania VCI3 US$89.00, iProg+ Programmer US$70.00.

VIIPlusLoader 08.021.10(BETA) FULL Installer is for the latest version 21.9, is the updated version of VIIPlusLoader-08.021.09-FULL-Installer.

you can click this link to download it:

https://www.chinaobd2.com/service/VCDS-HEX-V2-plus-loader-free-download-7.html

HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface Support Multi-function Online Updated Version for Volkswagen Audi Seat Skoda

The HEX-V2 Enthusiast USB Interface works with VCDS (VAG-COM Diagnostic System) via USB turning a Windows PC into a factory level diagnostic tool for Volkswagen, Audi, Seat or Skoda automobiles.

Now the latest version Software is VCDS V21.9

If you need latest version HEX V2 loader, you can follow this link:https://www.chinaobd2.com/service/vcds-hex-v2-plus-loader-free-download-7.html

WITH VCDS YOU CAN:
  • Gain factory level access to all systems in cars from 1990 through the current model year
  • Scan for and clear DTCs with 19,000+ fault codes decoded into plain text
  • Alter settings through module coding accessible only by factory level tools
  • Perform various country-specific modifications to your car (remove seat belt chime, enable gauge test/needle sweep, enable lap timer, operate windows and sunroof with remote, and much more)
  • View and log live data
  • Reset service reminder
  • Perform built in tests and calibrations normally reserved for factory level tools
  • Diagnose real failures instead of swapping parts!

Features:

  • Fully licensed for VCDS software, acts as the key to unlock the software, no additional software purchase required
  • VAG model year coverage: 1995 – Current model year (including 2016/2017)*
  • Fast Operation – faster on CAN based models than our older generation wired products
  • New improved car side connector increases durability and life
  • New improved detachable/replaceable robust USB A to USB B cable, with a screw strain relief. USB wire has been improved to be more flexible, more durable.
  • Incorporates all new design electronics with a new microcontroller to allow future expansion of capabilities
  • Enhanced indicator lamps for wide visibility by the user
System Requirements:
A 1.5 GHZ dual core processor with 1 Gb of RAM and Windows 7 or newer (Windows 7 through 10, but not RT) with an available USB 2.0 (or higher) port. Use a machine robust enough to properly support the operating system. Windows running inside a Virtual Machine (for example on a Mac) is not supported.

Product Support:
The HEX-V2 is fully supported via e-mail or over the phone as a USB interface for VCDS.

Support for configuration and VCDS-Mobile are provided via our Support Forum, in English only.

How to update the firmware of Hex V2

Before you update the Firmware of HEX V2, you need plug the HEX V2 interface to USB 3.0 port of your computer, then install the latest version VCDS software and VIIPlusLoader , run it as a administrator, turn off the antivirus softwares , such as AVG, McAfee, etc., Disable Windows Defender.

After update the firmware, you will be able to use the interface directly with English version VCDS.the other languages need to use by vcdsloader.

 

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: VIIPlusLoader 08.021.10(BETA) FULL Installer From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

1 thought on “VIIPlusLoader 08.021.10(BETA) FULL Installer”

Leave a Reply

Your email address will not be published.