It wasn’t very many years ago that bluetooth techology sound like something out of a futuristic movie,but nowadays we’d be shocked not to have a handheld device wirelessly sync to our car’s infotainment system.Bluetooth not only helps us become safer drivers by allowing us to speak hands-free on the road but also give us freedom to stream our music wirelessly to our Camry stereo.This guide will show you how to pair your Android or IOS device to your Camry via bluetooth.And this example mainly focus the Camry without the navigation system display.
Connect Your IOS iPhone Device:
Tap on the “Settings” icon on your iPhone,and make sure your iPhone bluetooth function is actived
Turn on your Camry’s stereo, and tap the “AUX” button on the stereo twice. This will bring up the pairing menu.
Once the menu pops up, tap the button below the “SETUP” message on the display.
You will hear an audio prompt instructing you to choose from multiple options. Select “PAIR.”
At this point you will be asked to name the new phone being connected; for example, “Jerry’s Phone.”
Then the system will ask you to confirm. Say “yes.”
The Bluetooth system will now deliver a passkey on the stereo display, which is a set of number that you will have to confirm on your iPhone.
Tap on the Bluetooth menu on your iPhone, and look for the “TOYOTA” hands-free system to pop up. The system might take a few seconds to detect your iPhone.
Then tap the name on your iPhone, and enter the passkey as shown on the stereo display.
After all of these steps are taken, you should receive an audio confirmation that your iPhone is paired. This completes the setup process.
Connecting your Android Device
The process of setting up the Bluetooth function on your Camry’s stereo is the same as above. The process of connecting your Android device requires different steps to be taken.
Start by tapping the “AUX” button, and make sure the Bluetooth function on your Android device is on.
Then proceed to follow the same steps as with an iPhone device until you receive a passkey.
Tap the Bluetooth setting on your Android device.
And then tap “Scan for new devices” at the bottom of the screen.
Once your Android device scans and finds the “TOYOTA” hands-free, enter the passkey as shown on the stereo display.
After all of these steps are taken, you will receive an audio confirmation that your Android device is paired. This completes the setup process.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!