Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Here CHINAOBD2.COM share the procedures to read Freescale MC68HC908GR16(0M76Z) by XPROG-M.
Preparations:
XPROG-M v5.84 Programmer Interface4
How to Install XProg-M V5.84 Software on Win7
Procedures:
Open Xprog software (5.70, 5.74, 5.84) , click on “Read Security Bytes”.
You can see the indicator flashes during the process.
No need to enter any “Security Bytes Name”, just click on “OK”.
Click on “Options”, then “Environment”.
Select “Device”, then “Manual” and then input “C3F4C412C413C414”, then “OK”.
Click on “Read”.
Brand: Freescale.
Type: MCU
Device: MC68HC908GR16(0M76Z)
Security bytes: C3G4C412C413C414 – ok
Done.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
BMW E90 RDC Module coding with NCSexpert and D-can cable
2019.12.24
How to Update Launch X431 PAD VII after Two Years Free Update?
2024.01.28
How to Setup Zed-NET for Zed-Full for Internet Work
2019.07.24
Zed-Full All Keys Lost Programming for Ford Transit 2017+ by OBD
2019.07.24
How to Use OPCOM to Adjust Clutch & Gear Adaptation Easytronic
2019.05.14
US$153.00-2019 Latest Version X-PROG Box ECU Programmer Shipping from Cambodia
2019.02.27
US$154.00-2019 Latest Version X-PROG Box ECU Programmer Shipping from Laos
2019.02.27
How to Do for Error in Tech Tool with Volvo Vocom ?
2024.01.28
Renault CAN Clip V195 and Consult 3 III For Nissan Professional Diagnostic Tool ...
2020.07.14
How to connect the Caterpillar ET software to the ECM
2024.01.28