Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3 Sometimes it gives firmware error prompt on ISTA when you using BMW ICOM to do diagnostics.I indicate that you need update your BMW ICOM firmware.So here chinaobd2.com show you guide on how to use IE browser to do firmware update for you BMW ICOM. Open you IE browser and input address:http://169.254.92.38:60080 After then it will ask you to input username and password to login Now input Username:root Password:NZY11502 After login,click “Channel/Device Configuration” Click ICOM status and it will show you ICOM voltage,it mean connection build If it show the “Update Firmware” option,it mean ICOM firmware update available. Click “Update Firmware” and then click browse to load ICOM firmware update file During updating process,all ICOM lights will flash. When updating complete,click “Reboot” to restart BMW ICOM. Done! This article tech Supported by China OBD2,