Some people have problems configuring the DTS Monaco 9.02 software to work with OpenPort 2.0 or Scanmatik Pro (SM2 Pro), they cannot select the appropriate vendor module (see image below). For Monaco 8 the vendor is shown as Tactrix and d-pdu is 11_26 and work. But in Monaco 9 the provider is empty while d-pdu is 11_28.
Do we need to edit an .ini file or something that registers the OpenPort as an option in the Vendor Module field? Here’s the hint: Monaco 9 can also identify the OpenPort2.0.
How to set up OpenPort/SM2 in DTS 9.02?
Double click on the appropriate REG file if you have Scanmatik2PRO or Tactrix Openport.
SM2Reg.
TactrixReg.
Both are original interfaces. If you have another Passthru interface, you can edit it yourself. It is displayed on the DTS9 settings screen. Works great.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: original Tactrix Openport
Related Posts
How to Enhance Jeep Renegade/Fiat 500X RA4 RG4 Radio Performance
2019.07.19
What is the Difference Between Ford IDS and FCOM
2019.05.31
FSC Code Solution for BMW E and F Series CIC
2019.07.19
FCOM Key On Engine Off KOEO Test for Ford Ka 1999
2019.07.17
How to Setup Zed-NET for Zed-Full for Internet Work
2019.07.24
Toyota Previa MPV Smart Card All Keys Lost Programming Guide
2019.02.24
VW AUDI ODIS 4.33 Software for VAS 5054A and VAS6154 Free download+ FAQs
2019.09.24
Super MB Pro M6+ Review: Supports BMW E-SYS
2023.04.1
Toyota Lexus ES250 Tire Pressure Sensor Program by Launch X431
2020.07.18
Caterpillar ET 2018A Electronic Technician Software Free Download
2019.07.24