How to Repair Audi A6 Idle Speed Exceeds Limit After Throttle Cleaned

Posted on by VCDS
How to Repair Audi A6 Idle Speed Exceeds Limit After Throttle Cleaned

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

This mini post share by one of my blog reader JK.His customer asked he to clean the throttle,then found this problem.So here I put the solution to solve Audi A6 idle speed exceeds limit after throttle cleaned.

How to Repair Audi A6 Idle Speed Exceeds Limit After Throttle Cleaned

And here is a collection of Audi A6 Trouble Repair.

Symptom: The idle speed of Audi A6 reaches 1200RPM after the throttle is cleaned. Cause is found

out by X431 that idle speed setting exceeds limit.

Solutions:

1.Connect X431.

2.Turn on the ignition switch.

3.Click Volkswagen icon and select Audi A6 ordinary mode. Then enter the engine electronic system to erase the fault code (it can be erased).

4.Select the function of “Adaptation” and enter “000” as channel No. Click [OK]. X431 will display the message about successful clearance of adaptation.

5.Select the function of “Basic Setting” and enter “001” as channel No. Click [OK]. The engine speed will be slowed down to about 800 RPM immediately. Then the vehicle is normal.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to Repair Audi A6 Idle Speed Exceeds Limit After Throttle Cleaned From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *