The following procedures should be followed before service work is carried out on the electronic Parking brake system fitted to the Ford S-max/Galaxy models 2006-2008.
And for more real case of Ford Repair,please check here
The following pre-requisites should be met before commencing:
- Vehicle on level ground
- Ensure vehicle battery is fully charged
Service mode activation (EPB off)
- Release the parking brake
- Switch ignition ON (pos 2)
- Press and hold down throttle pedal
- Press and hold down the parking brake switch
- Switch ignition Off (pos 0)
- Switch ignition ON (pos 2) within 5 seconds
- When the parking brake has fully actuated (off) switch ignition OFF (pos 0)
- Release throttle pedal
- Release parking brake switch
Service mode de-activation (EPB on)
- Switch ignition ON (pos 2)
- Press and hold down throttle pedal
- Lift and hold the parking brake switch
- Switch ignition Off (pos 0)
- Switch ignition ON (pos 2) within 5 seconds
- When the parking brake has fully actuated (on) switch ignition OFF (pos 0)
- Release throttle pedal
- Release parking brake switch
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!