How to Release Ford S-Max/Galaxy EPB Manually

Posted on by VCDS
Electronic Parking Brake

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

The following procedures should be followed before service work is carried out on the electronic Parking brake system fitted to the Ford S-max/Galaxy models 2006-2008.

Electronic Parking Brake

And for more real case of Ford Repair,please check here

The following pre-requisites should be met before commencing:

  • Vehicle on level ground
  • Ensure vehicle battery is fully charged

Service mode activation (EPB off)

  • Release the parking brake
  • Switch ignition ON (pos 2)
  • Press and hold down throttle pedal
  • Press and hold down the parking brake switch
  • Switch ignition Off (pos 0)
  • Switch ignition ON (pos 2) within 5 seconds
  • When the parking brake has fully actuated (off) switch ignition OFF (pos 0)
  • Release throttle pedal
  • Release parking brake switch

Service mode de-activation (EPB on)

  • Switch ignition ON (pos 2)
  • Press and hold down throttle pedal
  • Lift and hold the parking brake switch
  • Switch ignition Off (pos 0)
  • Switch ignition ON (pos 2) within 5 seconds
  • When the parking brake has fully actuated (on) switch ignition OFF (pos 0)
  • Release throttle pedal
  • Release parking brake switch

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to Release Ford S-Max/Galaxy EPB Manually From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *