Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
How to Installing Batteries for Benz MB Star SDconnect C4 ?
Preparing all goods as bellowing picture :
1 MB SD Connect C4 Multiplexer
2 Ni-MH Rechargeable batteries, Size: AA, Voltage: 1.2V, Capacity: above 1700Ma
3 108M WIFI Card
4 Remove the rubber:?Plum screwdriver, Specification: T-20?
Step 1 : Use the T-20 Plum screwdriver to take out the screws as below.
Step 2 : take out the rubber as below.
1 Batteries Space
2 WIFI Card Space
3 SD Card Space
Insert the Rechargeable batteries.
Step 3: Use the T20 Plum screwdriver to take out the screws of Batteries Space
fixation as below.
Step 4: Take out the fixation of Batteries Space. Pay attention to the Battery polarity
marked in the Batteries Space.
Step 5: Insert the batteries.
Step 6: Button on the Fixation of Batteries Space after inputting the Rechargeable
Batteries
Step 7: Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as
below.
Inserting the batteries is finished.
More interesting , welcome to check www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat
Related Posts
Autel MaxiCOM MK808S vs MaxiCOM MK808BT PRO vs MaxiCOM MK808S-TS
2024.01.28
Ford Focus Cruise Control CCF Programming by FCOM
2019.05.31
2019 2018 TecDoc EPC Spare Part Catalog Free Download
2019.05.31
DIY:How to Remove ECU for Toyota FT86
2019.05.31
Scania Truck Auxiliary Heater System Flame Monitor Error Solution
2024.04.17
Toyota Steering Angle Sensor Output Correction by Launch X431
2019.05.13
Honda 2020 EPC Spare Catalogue Installation Guide on Win 7 Win 10
2020.08.5
FSC Code Solution for BMW E and F Series CIC
2019.07.19
Nissan Consult 3 Plus BCM Configuration Guide
2019.05.31
Renault CAN Clip V195 and Consult 3 III For Nissan Professional Diagnostic Tool ...
2020.11.4