To connect Wi-Fi for a BMW ICOM (Intelligent Communication Optical Module), you typically need to follow these steps:
Video:
1. Plug in the USB interface connected to wifi first, and then power on.
2. Then plug in the network cable connected to the computer.
3. The computer is connected to the local router’s wifi.
4. Open IE browser and enter ICOM configiration address (based on current real ICOM IP )
Enter the Wi-Fi Password: If the network is secured, enter the correct Wi-Fi password. This information should be available in the ICOM’s documentation or on the device itself.
5. Select WLAN Settings
Enter WiFi settings
Save Changes.
6. Disconnect LAN cable and restart ICOM, then ICOM will auto connect with WiFi .
7. If using our ICOM software and USB-WIFI, enter configuration as following:
method 1: PC – router – ICOM
connect PC to the router, then connect ICOM to router
method 2: ICOM – PC
directlt connect ICOM emulator to PC
Remember, the specific steps can vary depending on the ICOM model and the software version you are using. Always refer to the user manual for the most accurate and detailed instructions. If you are not comfortable performing these steps or encounter difficulties, it’s advisable to consult a professional or reach out to BMW support for assistance.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
How to Use Zed-Full Program Keys for Fiat Egea by OBD
2019.08.7
VCP System Perform DPF Emergency Regeneration for VW
2019.07.13
Audi A6 C5 reversing alarm system trouble (real case)
2019.02.24
2023 2018 Scania Multi EPC Parts Catalogue Free Download
2023.06.14
ODIS enables/disables VW/Audi component protection
2024.01.28
BMWAiCoder 5.0 4.6 4.4 Free Download
2019.03.1
Volvo PTT Perform Newer Parameter Template Programming Guide
2019.02.26
Xhorse Dolphin XP005 vs. XP007 Key Cutting Machine
2019.12.26
Best VXDIAG VCX Nano OBD2 Scanners Review
2019.05.14
What is j2534 pass thru?
2019.06.3