This instruction show you guide on how to change constant speed for Deutz engine with EDC17 by SerDia2010 diagnostic software. To use this function, the engine has to be in fixspeed mode or
the setting allows to activate the fixspeed mode.
Related Contents:
Deutz Diagnostic Kit DECOM for Deutz Engine
2023 Deutz Serdia2010 v14.1.9.1 Diagnostic Software Free Download
Deutz Serpic EPC Parts Catalogue 2014 2012 Free Download
Screen change constant speed
The actual setting for the fixspeed values are shown on the left upper part of the screen.
The setting of the switch is marked, too
Additionally the actual engine speed and the speed setpoint is shown as value and tachometer
on the right side inclusive hysteresis to have a qualitative feedback.
Button “read from ECU”:
Button “write values to ECU”:
Values shown on the screen for fixspeed 2 (first intermediate speed)
and fixspeed 3 (2. intermediate speed) are flashed to the ECU.
If the engine is still running while activation of this procedure, SerDia will ask to stop
engine automatically
Textbox “Constant Speed 2″,”Constant Speed 3”:
Changes in these textboxes have to be confirmed with ENTER.
After confirmation the new value will get active, if switched on (see marking point at fixspeed).
It is not possible to install a speed below fixspeed one or above fixspeed four.
The fixspeeds 1 and 4 are not changeable in this screen (see hints above).
For more repair case of Deutz engine,please refer to:Deutz Engine Repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: diagnostic software EDC17
Related Posts
Perkins EST Software Perform ECM Flash for 404F-22T Engine
2020.08.27
How to Register and Update for LAUNCH X431 PROS ?
2024.01.28
How to Transfer CAT ET Data Log File to Excel?
2023.05.22
How to Update Launch X431 PAD VII after Two Years Free Update?
2024.01.28
How to install wabco diagnostic kit wabco diagnostic software WDI
2024.01.28
How to choose PCMTuner or Fetrotech Tool or dFlash?
2023.04.13
Caterpillar ET 2023A 2019C 2018A Electronic Technician Software Free Download
2024.01.24
How to Solve Benz Xentry “2221-45 No access authorization” Error
2023.04.4
Doosan DL06 Engine Compression Test by e-Doctor
2024.03.28
How to Clone Tricore ECU by FoxFlash / KT200 ECU Programmer
2023.04.2