DLB can be used to set the Odometer Value in the LCD display.This article show a guide on how to use Diamond Logic® Builder to program instrument cluster odometer value.
Preparations:
Navistar Diamond Logic Builder (DLB) Free Download
How to Install Navistar Diamond Logic Builder (DLB) Software
Main Procedures:
Step 1:In the menu bar, select Tools > Set Odometer.
The Set Odometer window appears.
Step 2:Read and follow the instructions in the Set Odometer window. Then, select the appropriate option for setting the odometer.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: program
Related Posts
How to Load a Configuration File into Caterpillar ECM by CAT ET
2023.11.6
How to do odometer correction for Toyota by Iprog+ Programmer
2024.01.28
XPROG V6.12 vs. XPROG V5.84: adds new adapters / authorization, new PCB
2019.12.13
Advice for Land Rover key programming : digimaster3 + Yanhua mini ACDP
2019.04.9
Iveco EASY 11.1.5 Software Free Download
2019.03.27
How to Open the Corresponding Disk When Running Mitchell Ondemand5 Software
2019.07.24
Iprog+ Programmer Full Iprog+ Odometer Correction Support IMMO + Mileage Correct...
2019.04.26
2019 Latest ATMEGA64 Repair Chip Update Software for XPROG-M Programmer V5.0/V5....
2019.02.26
Honda Odyssey 2016 All Key Lost Programmign by Autek iKey820
2023.06.10
Jeep Cherokee RKE Remote Keyless Entry Programming by Launch X431
2019.03.25