In this article,chinaobd2.com show you how to use Bosch ADS 625 to read and clear DTCs for Pontiac G6 Base 3.5L 2008.And here,i select read DTCs by selecting individual controllers as example,it will scan only the controllers selected on the vehicle,if you want to select all system on your vehicle,you can tap “Select All”.
Procedures:
1.Build connection between Bosch ADS 625 and vehicle,after ADS 625 identify the vehicle,select “Read DTCs”.
2.Select the desired vehicle controller then select continue.
3.DTCs will be read from the selected vehicle control-ler. Select a listed DTC for Related Diagnostic Infor-mation See Diagnostic Information section.
If a DTC has Code Criteria available there will be an “*” next to the DTC.
4.Now you can tap “Clear DTCs” button to clear diagnostic trouble code.
Note:You need to repair related trouble of DTCs,otherwise it will come back after you clearing.
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. The main popular diagnostic tools for workshop are:Vag COM, VAS5054A, GM Tech2, iProg+ Programmer, Orange 5 programmer, Scania VCI3, etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!