Yanhua Mini ACDP Ford DPS6 Gearbox Clone with Module26

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Mini ACDP Ford DPS6 Gearbox Clone with Yanhua Module 26 Tutorials:

The Device Need:

1.ACDP Host

2.OBDP+ICP

3.20 Pin Cable

4.Ford DPS6 Interface Board (Yanhua Module 26)

Yanhua ACDP Module26 Support 6-speed dual-clutch gearbox clone for Ford Focus, Ecosport, Fiesta, Aspire, Figo, etc.

Connection:

Install the interface board, short the jumper cap on the OBP+ICP adapter to the “CAN-R” JOIN side.

After connection, Open the ACDP APP.

Choose Ford – Gearbox Clone – DPS6 (Please Note that you will not get the online help from the technician friend when operating if you didn’t login to the technician group)

Step 1: Connect the system and Chip Reading ( Please connect ACDP with gearbox, and ensure the stable network connection and Do Not pull out the device during it working)

Step 2: Read/Write Data – Full Backup Data, Save the File

Step 3: Disconnect

After Disconnect Finishing: Connect the new DSP6 gearbox computer and prepare to write the original data.

The Connect Again

Then Read/Write data – Full Write Data, choose the original data file that saved in the previous step.

After Write Chip data, return the previous page – Disconnect.

Disconnect Fisnished,Ford DPS6 Gearbox Computer Cloning Done.

Video Gudie:

This Post: Yanhua Mini ACDP Ford DPS6 Gearbox Clone with Module26 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!