Yanhua ACDP2 Correct Mileage for Toyota R7F714xx ODO/Buick BCM (NEC3558)

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Good news!!! Now Yanhua Mini ACDP1/ACDP2 can support Toyota R7F714xx ODO/Buick BCM (NEC3558) mileage correction. Yanhua Module 35 is newly released to work with ACDP. No soldering, No need to pry up the chip pins, No capacitor removal.

Yanhua ACDP Module 35 functions:

Support Toyota semi-LCD meter mileage correction with chip model R7F701441.
Support toyota full LCD meter mileage correction with chip model R7F701401.
Support Buick BCM mileage correction with chip model NEC3558.

Yanhua ACDP Module 35 supported car models:

Support Buick (2017-2022), Toyota (2021-2024) Levin, Corolla, Camry, RAV4, Frontlander, Sienna, Alphard, Vellfire and so on…

Module features:

1.Using a quasi-blind plug-in interface board, No soldering, No need to pry up the chip pins, No capacitor removal, No soldering required to read and write data without damage.

2.The third generation PCB interface board locking technology independently developed by YanHua Tech makes the interface board locking more accurate and firm.

3.The software comes with pin detection function, making data reading and writing safer and more reliable.

How to enter the menu?

Run ACDP APP

Select Module>> TOYOTA ODO>> R7F701401 or R7F701441>> Identify Info>> Pre-process chip>> Reset mileage (auto mode)

Or select Module>> Buick BCM (D70F3558)>> Identify>> Auto Mode

How to connect Yanhua ACDP, Module 35, and Toyota/ Buick Cluster?

For example: TOYOTA R7F701401

1.Push the interface plate latch to the unlock position, locate the motherboard chip and the latch fastening points, and determine the installation area of the interface plate.

2.Find the correct positioning holes of D1-D4 on the instrument.

3.Test Point Pin Definition.

4.Place the interface board accurately into the installation area, align the pins with the D1, D2 positioning holes.

5.Press down on the interface board, push the PCB lock buckle to the Locked position to lock the interface board, installation is done.