XTool X100 Pad3 BMW FEM 95128 Reading NO Soldering

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

How to use XTool X100 Pad3 read BMW FEM 95128 data without dismantling the chip.

Tools Requipment:

Xtool X100 Pad3 Tablet Key Programmer

BMW FEM-BDC 95128/95256 Chip Anti-theft Data Reading Adapter

XTool X100 Pad3 EEPROM Adapter (in Xtool X100 Pad3 package)

EEPROM Board (in Xtool X100 Pad3 package)

Connection:

Connect with Xtool X100 Pad3, Eeprom Adaper, Eeprom board, BMW FEM-BDC 95128/95256 Chip Data Reading 8pin adapter,BMW FEM 95128 board.

Step 1:

Open Xtool X100 Pad3 Tablet, Choose Special Function – EEPROM- EEPROM Adapter

Then Choose Read/Write Eeprom – Eeprom Adapter – 95CXX series – 95128 – Read Eeprom Data

Before Reading, it will ask to save file, Name the file and Click OK, Start to reading.

BMW FEM 95128 Reading Successfully by Xtool X100 Pad3. It will show the file saving address. And you can choose edite or not.

Video Guide:

This Post: XTool X100 Pad3 BMW FEM 95128 Reading NO Soldering From ChinaOBD2 Official Blog
Please keep this link if you copy the post!