Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

Xhorse MQB48 Adapter FAQs

Posted on February 27, 2025 by

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Here have collected some frequently asked questions about the new XHORSE MQB48 Adapter for VVDI MLB TOOL.

Q1: Do I need to replace the replacement chip again when switching back to the MLB?

A: This chip is used to replace the original chip in the MLB main unit. Once replaced, it will work with the information collector. You can discard the original chip; there’s no need to keep it.

Q2: Are Bonus Points required for the MQB48?

A: No, no points are required to collect MQB48 immobilizer data.

Q3: Is it compatible with the Xhorse VVDI Key Tool Plus Pad (paired with the MLB Tool) or only with VVDI2?

A: It is compatible with both VVDI2 and Key Tool Plus.

Note: Tablets with a single Type-C port may have poor power stability, which can lead to longer collection times and lower success rates. We strongly recommend using a device with better power stability.

Xhorse MQB48 Adapter FAQs

Q4: Why does it only work with Xhorse VVDI2 and not with the VVDI Key Tool Plus?

A: It works with both VVDI2 and Key Tool Plus.

Q5: Do I need to remove all the same capacitors?

A: You only need to remove one capacitor and solder it back in place.

Q6: If I purchase a new VVDI MLB tool, will it already have the new chip, or do I still need to replace it?

A: You will still need to replace the chip.

Q7: Why doesn’t the MLB tool work with MQB48 on the Xhorse Key Tool Plus?

A: It can work with Key Tool Plus to collect data, but using a PC is recommended for better performance.

Q8: Will modifying the MLB void its warranty?

A: No, it will not.

Q: Does it support all MQB48 keys, including proximity, bladed, and digital cluster keys?

A: It depends on the key type. Check the wiring diagram in the software. If the key’s circuit board matches the wiring diagram, it will work.

Q: Can I simply generate the correct remote using the app and then write the data to the key?

A: The Xhorse VVDI MLB Tool only calculates the immobilizer data. You’ll still need VVDI2 or VVDI Key Tool Plus to generate the dealer key and program the key.

To be continued…

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

Related Posts
How to Activate Windows 7 without Product Key |Windows is Not Genuine
Xhorse MQB48 Adapter FAQs

Some Friends don't know how to activate win7, when they receive the diagnostic software with win7 sytem. http://www.chinaobd2.com/upload/software/win7activation.zip download this Read more

How to Install Original Mercedes BENZ EPC/WIS/ASRA net |China OBD2 Store
Xhorse MQB48 Adapter FAQs

Please ensure that you choose computer systems that meet our requirements for the installation. You will find adetailed listing in Read more

How to Replace Benz W204 Engine Oil Filter
Xhorse MQB48 Adapter FAQs

Frequent oil changes are perhaps the most important procedure you can do to maintain and prolong the life of your Read more

Toyota Previa MPV Smart Card All Keys Lost Programming Guide
Xhorse MQB48 Adapter FAQs

Toyota Previa is an MPV produced by Toyota since 1990. It is called Estima (?????) in the Japanese market and Read more

This Post: Xhorse MQB48 Adapter FAQs From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit
Next: Next: OBDSTAR X300 Classic G3 Read PSA BSI-Q05 EEPROM and PIN CODE Success!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Remove Differential Gear for FENDT 900 Vario COMIII
  • Quick Tips to Use Xhorse BMW G Series BDC2 Adapter
  • International MaxxForce 7 SPN 27 FMI 4 EGRP Signal Out of Range Low
  • Detroit DD13 SPN 84 FMI 3 MCM Vehicle Speed Sensor Open Circuit
  • How to Solve Caterpillar 24 PID 100-3 Oil Pressure Voltage High?

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • VCDS on Scania SDP3 2.59.1 free download Scania Diagnosis & Programming 3 download link
  • Glynn McKay on Scania SDP3 2.59.1 free download Scania Diagnosis & Programming 3 download link
  • jakub brosz on Scania SDP3 V2.64.3 Download link
  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • Launch CRP129 HD
  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer

Links

  • BOBD2 Auto Diagnostic Tools Market
  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2