Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
How to decode hon66 – all of them are 6-6 cuts which doesn’t fit to my crv blade?
Locksmith Feedback:
Les Moyer:
Cut 6 on both sides needs to be a 1. On worn keys, the last few cuts can be mis-read as deeper than they should be.
Wire Works:
I’ve had problems duplicating Honda keys on dolphin xp005 because of original being worn. I just remove one of the locks and get the code and code cut a new key.
Security Locksmith, LLC:
I just read the key pic you posted by eye in seconds.
Easy just practice and use common sense, learn the rules per code series.
Other HON66 issue with Xhorse key cutting machine:
Problem:
The web is goo thick to pass and unlike most machines you can’t fix this with a shim raising the blank up.
UOBDII.COM engineer solution:
Just put the thickness or the cutting depth 1.15 instead of 1.05 while cutting both sides and it will get you a perfect cut for all aftermarket hon66 blades.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!