Xhorse Dolphin XP-005L Touch Sreen Replace Tutorial: If the touch screen of Xhorse Dolphin XP005L key cutting machine cannot turn on, you’d better take apart the screen to check if the cables are loose. If the problem cannot be solved, please change a new screen.
Steps to replace Dolphin XP005L touch screen:
Step 1: Remove back case and handle
Remove all screws of back case and handle on the XP005L key cutting machine.
Step 2: Remove back case of screen
Remove all screws of touch screen back case, and disconnect cables remarked.
Step 3: Remove screen
Use the flat head screwdriver to push out the mount which is used for fixing the screen
Remove the plastic pin socket from screen cable with sharp piler or remove whole screen and cable from Xhorse Dolphin XP-005L
Kindly notice:
Please take a photo for that pin socket before removing it. All pin should be in the exact same position as before when you put it back.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!