Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
This post show guide on how to use WinOLS to tune ECU map for Volvo 850 T5 Motronic 4.3 ECU. The Volvo 850 T5 uses a Motronic 4.3 ECU. This car has a 28F512 EEPROM inside which is soldered onto the board.
To tune this car by yourself you need the following:
1.New 28F512 chip(not necessary, but better) cost around 7 euro.
2.DIP32 socket cost around 1 eruo
3.A programmer which can handle a 28F512, I suggest a GALEP 4 or 5, but others also will do the trick. Please do not use a Willem programmer, they just screw your file up often!
A used Galep or similar programmer costs about 100-200 euro.
4.Edit software like WinOLS, TunerPro or ECM2001. TunerPro is freeware and able to do
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: abs cat EEPROM EPROM original program smart
Related Posts
How to Use Cummins Insite Change Road Speed Parameter for Saf-T-Liner C2
2020.05.14
OBDSTAR X300 Classic G3 Read PSA BSI-Q05 EEPROM and PIN CODE Success!
2025.02.28
How to make Xentry Passthru 12.2018 work with Actia XS 2G
2019.03.11
JCB StageV Tier4 Air Filter Pressure Sensor Active at Init State
2023.10.4
Tips & Warning: Chrysler Diagnostics & Programming by MicroPod 2
2019.03.11
CHIP PROGRAMMER SOCKET SSOP34
2018.12.17
2019 Latest Version CGDI AT-200 AT200 BMW ECU Programmer & ISN OBD2 Reader
2019.04.9
FCOM Key On Engine Off KOEO Test for Ford Ka 1999
2019.07.17
What is the PCB Photo for Super MB Star C6 ?
2024.01.28
OBDSTAR MT203 CAN Driver Register and Replace Information
2024.12.24