Question:
I want to read and write Renault EMS3125. Which tool can do that?
Uobdii.com engineer replied:
OBDSTAR DC706, Foxflash, and PCMTuner are good ECU programmers to choose.
All support Renault EMS3125 reading and writing.
1.OBDSTAR DC706 ECU Programmer
Operation mode: by BOOT
ECM software required: ECM V30.52 or above
Accessories requirement:
OBDSTAR MP001 Programmer with W006 and C401
OBDSTAR ECU Bench Jumper Cables
Main OBD Cable
12V power supply
Keep DC706 charging and communication during the operation.
Make sure the network connection is normal as well.
Menu function path:
ECU Flasher>> Car>> ECM>> ECM V30.52 or above>> ems3125>> RENAULT CONTINENTAL EMS3125 TC1782
Check the connection method and operation instruction in the device.
Connection method:
First, disassemble the ECU shell and weld the wires as shown below to connect 1 BOOT and 1 C4-01 A1 pins;
Then, connect the wiring harness according to the Pinout diagram below.
Finally, connect the MP001 Adapter, and then follow the equipment prompts.
After connection, click “Start” and select “BOOT” and “MP001” mode to perform read the write operations
Connect ECU- OK
Read INT flash (TC1782) data- OK
Read INT eeprom (TC1782) data- OK
Connect to a new Renault continental EMS3125 ECM
Load the original INT flash and eeprom data to write into the new ECM
Write data successfully
OBDSTAR DC706 Renault ECM Support List (ECM V30.53):
BRAND | ECU BRAND | TYPE | DUMP | R/W INT flash | R/W
INT eeprom |
R/W EXT flash | R/W EXT eeprom | Other | COMM. MODE |
RENAULT | BOSCH | EDC16C41 | MPC561 (2) | √ | √ | BENCH | |||
RENAULT | BOSCH | EDC17C42 | TC1767 | √ | √ | BENCH | |||
RENAULT | BOSCH | ME17.9.23 | TC1724N | √ | √ | Modify VIN Reset (Virgin) |
BENCH | ||
RENAULT | CONTINENTAL | EMS3110 | TC1766 | √ | √ | BOOT | |||
RENAULT | CONTINENTAL | EMS3125 | TC1782 | √ | √ | BOOT | |||
RENAULT | MAGNETI MARELLI | IAW 6R.20 | TMS370C036 | √ | BENCH | ||||
RENAULT | SIEMENS | EMS3132 | AM29F200BB | √ | √ | IMMO OFF | OBD/
BENCH |
||
RENAULT | SIEMENS | EMS3134 | AM29F400BB | √ | √ | IMMO OFF | BENCH | ||
RENAULT | SIEMENS | SIRIUS 31H | AM29F200BB | √ | √ | IMMO OFF | OBD/
BENCH |
||
RENAULT | SIEMENS | SIRIUS 32 | AM29F200BB | √ | √ | IMMO OFF | OBD/
BENCH |
||
RENAULT | SIEMENS | SIRIUS 32N | AM29F200BB | √ | √ | IMMO OFF | OBD/
BENCH |
||
RENAULT | SIEMENS | SIRIUS 34 | AM29F400BB | √ | √ | IMMO OFF | BENCH | ||
RENAULT | SIEMENS/CONTINENTAL | SIM32 | 64F7055+95160 | √ | √ | BENCH |
2.Pcmtuner ECU Programmer
Use Module 22 protocol
Supports Renault Duster, X-Ray EMS3125 (TC1782/2560KB) R/W via OBD OK
3.Foxflash ECU Chip Tuning Tool
Support Renault Captur 2.0l 16V/ Clio 1.2 16V/ Megane 2.0l 16V Turbo/ Terrano 1.6l 16V/ Siemens EMS3125 R/W via OBD and OTB (with Foxflash OTB 1.0 Expansion Adapter)
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!