Xhorse Multi-Prog is the upgraded version of VVDI Prog. It covers all the functions of old programmer and adds new functions incl. read, write and clone ECU/gearbox TCU, vehicle engine data calculation and processing (MEDC17, EDC17), checksum correction, and data comparison, etc. It’s an even more powerful Pro-level ECU programmer that supports flexible extension of third-party plug-ins.
Main contents:
Xhorse Multi-Prog Highlights
Xhorse Multi-Prog Functions
Xhorse Multi-Prog Software Download
Xhorse Multi-Prog Package & Programming Test
Xhorse Multi-Prog Support List
Xhorse Multi-Prog FAQs
PART I: Xhorse Multi-Prog Programmer Highlights
1.Built-in update software: Make Multi-Prog firmware update timely.
Free Update online.
Language: English, Chinese
2.High-speed USB communication interface: Make software automatically connect.
3.Smart operation mode: possible causes of error will be listed.
4 Reserve ports: For future update.
5.Self-test function: Check if the machine works well or not.
6.Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed.
7.Get free BMW ISN read function and NEC, MPC, Infineon etc chip continuously update service.
PART II: Xhorse Multi-Prog Functions
1.Read & Write and Clone ECU
BMW B48/B58 reading ISN
BMW MSD80/81 /85/87/MSV90
Mercedes-Benz SIM271
BMW MSV80
VW BOSCH MED17 Series ECU
BMW N13/N20/N55/B38/TC17X
Support Marelli, Siemens, Delphi and other ECU manufacturers
2.Read & Write and Clone TCU
Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VCS and other models TCU
3.Vehicle Engine Data Calculation and Processing
MED17/EDC17 data processing
4.Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services
5.Read & Write MCU
Support reading and writing MCU of various brands includingRenesas, Motorola, NXP, Infineon, etc.
Support certain encrypted chip reading and writing
6.Read & Write Vehicle IMMO Module
Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO,VW MQB dashboard, AUDI BCM2, etc.
Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common IMMO modules
Note: Compatible with Xhorse solder-free adapters and cables
7.Read & Write EEPROM
Support EEPROM and FLASH
8.Read & Write Vehicle Dashboard
Support dashboard of VW, Honda, Hyundai, Kia, etc.
PART III: Xhorse Multi-Prog Software Download
Free download software here
Software Display:
PART IV: Xhorse Multi-Prog Package & ECU Programming Test
It comes with all the goods below:
1pc x power cable
1pc x MCU DB15 cable
1pc x USB cable
1pc x Main unit + VH13 adapter
1pc x Power adapter
1pc x MCU cable
1pc x ECU cable
1pc x VH24 interface adapter board
1pc x VH20 interface adapter board
1pc x OBD cable
1pc x ECU DB15 cable
5pcs x ECU harness plug replacement parts
Xhorse Multi-Prog ECU Programming Test:
PART V: Xhorse Multi-Prog ECU & TCU Support List
1.ECU R/W on Bench Mode
VW series
SIMOS PCR2.1, EDC17c64
BOSCH: MG1CA811
BOSCH: MED17.1.6, MED17.1.21, MED17.1.61, 5, MED1 7.5.1, MED1 7.5.2,
MED1 7.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
BOSCH: EDC17C46, EDC17C74, EDC17CP24, EDC17CP44, EDC17CP54, EDC17U01,EDC17U05
BOSCH: MG1CS002_SPC5777, MD1 CP014_TC298TP, MG1 CS001_SPC5777, MG1 CS011 _SPC5777,MG1CS002_TC298TP, MD1 CP004_TC298TP, MD1 CP004_SPC5777, MG1 CS111_SPC5777, MD1 CS004_TC298TP, MG1 CS008_SPC5777, MG1CS008_TC298TP
CONTINENTAL: SIMOS8.3x, SIMOS8.4x, SIMOS8.5x, 6X
BMW series
CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
BOSCH: MD1CP002_SPC5777, MG1 CS003_SPC5777 (B48, B58), MG1 CS201 _TC298TP(B38, B48, B58), MD1CS001_TC298TP, MG1 CS024_TC298TP(B48, B58), MD1CP032_TC299
BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC1 7CP45_Exx, EDC17C06, EDC17C56
BOSCH: MEI 7.2.1
BOSCH: MEVD1 7.2.3, MEVD1 7.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx,
MEVD17.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55), MEVD17.2.H, MEVD17.2.6_Fxx, MEVD17.2.P_Fxx, MEVD17.2.K
BOSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, 2_TC1796, MEV1 7.2.1
Mercedes–Benz series
CONTINENTAL: SIM271 DE, SIM271 KE
BOSCH: MEI 7.7, MED17.7.3.1, MED1 7.7.1, MED1 7.7.2, MED1 7.7.3, ME1 7.7.8
BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
BOSCH: CRD3x.x_TC1793, CRD3x.x_TC1 797
BOSCH: MD1CP001-SPC5777, MG1 CP002_SPC5777, MD1 CS006_TC298TP
GM series
DELPHI: DCM3.7AP
DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98
Nissan series
DENSO: 23740-3Nxxx_Gen1 SH72531
BOSCH:EDC17C84
Hyundai/Kia series
BOSCH: ME17.9.11, MEI 7.9.11.1
BOSCH:EDC17C53
BOSCH: MEG17.9.1 2_ECU
Ford series
BOSCH: EDC17C70, EDC17CP65
BOSCH: ME17.0.3, ME17.8.5
Volvo series
BOSCH: EDC17CP48, EDC1 7CP48_ver2, EDC1 7CP22
Other
AM_ME1 7.8.5,DOO_ME17.8.5
BOSCH: MG1CA007, MEI 7.8.8_TC1728, ME1 7.8.8_TC1 728_HW2, ME17.8.8_TC1 767,
ME1 7.8.31, ME1 7.9.52
BOSCH: EDC1 7C55, EDC1 7C1 0, EDC1 7C1 0_TC1 796, EDC1 7C1 0_TC1 797, EDC1 7CP42, EDC1 7CP14,EDC17c81
BOSCH: MEVD1 7.8.4
BOSCH: MED17.8.1 0_TC1 728, 8.1 0_TC1 728_Hw2,MED1 7.8.1 0_TC1 767
BOSCH: MD1 CS01 8, MG1 CS026_SPC58, MG1 CS032, MG1 CS1 63, MD1 CS012, MD1 CS089,MD1CS069, MD1CS005_TC298TP, MG1 CS01 5_TC277TP, MG1 CS01 6_TC275TP,
MG1 CS01 7_TC277TP, MG1CS018, MG1CS019, MG1CS088
CONTINENTAL: SID208, SID209, SID211, SID807EVO
DENSO: KH, ZY, SH70xx_275xxx-xxx
2.ECU R/W on Boot Mode
VW series
SIMOS PCR2.1, EDC17c64
BOSCH: MED17.1.6, MED17.1.21, MED1 7.1.61, 5, MED1 7.5.1, MED1 7.5.2,
MED17.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
BOSCH: EDC1 7C46, EDC1 7C74, EDC1 7CP24, EDC1 7CP44, EDC1 7CP54, EDC17U01,
EDC17U05
BOSCH: SIMOS8.3X, SIMOS8.4x, SIMOS8.5x, 6X
BMW series
CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC17CP45_Exx, EDC17C06, EDC17C56
BOSCH: ME1 7.2.1
BOSCH: MEVD1 7.2.3.MEVD17.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx,
MEVD1 7.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD1 7.2.P_Fxx, MEVD1 7.2.K
BOSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, 2_TC1796, MEV1 7.2.1
Mercedes Benz series
CONTINENTAL: SIM271DE, SIM271KE
BOSCH: ME17.7, MED17.7.3.1, MED17.7.1, MED1 7.7.2, MED1 7.7.3, ME17.7.8
BOSCH: EDC17CP10, EDC17CP57, EDC17CP46,EDC17CP60
DELPHI: CRD2.x_MPC556x
Nissan series
BOSCH: EDC17C84
GM series
DELPHI: MT80.MT80.1
DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98
Hyundai/Kia series
DELPHI: MT86
DELCO: DCM6.2AP
Other
CONTINENTAL: SID208, SID209, SID211, SID807EVO, SID310
SDI21.1, SDI21.2, SDI21.3
BOSCH: ME1 7.3.0
MARELLI: 8DF, MM10JA
3.TCU R/W on Bench Mode
VW series
DL382, VL381, DL501 Genl, DL501 Gen2, DQ200Dxx,DQ200-G2, DQ200-G2_PQ, DQ200-MQB, DQ250-MQB, DQ250 Exx/Fxx
BMW series
GETRAG DKG 436 Genl, GETRAG DKG 436 Gen2
Mercedes Benz series
VGS-FDCT, VGS2-FCVT, VGS2-FDCT
Ford series
ETRAG MPS6GETRAG
DPS6, DC4
4.TCU (Boot Mode)
Ford series
DPS6, DC4
Other
ZF 9HP
Keep updating…
PART VI: Xhorse Multi-Prog FAQs
Q1: Can Xhorse Multi-Prog completely replace VVDI Prog?
A: Yes, Multi-Prog covers all functions of VVDI Prog programmer.
Q2: Is Multi Prog compatible with all adapters of Xhorse VVDI PROG?
A: Only supports some.
Q3: Can Multi prog repair BMW CAS and FRM?
A: Yes.
Q4: Does Multi–Prog Programmer support m35128wt and m35160wt?
A: Yes.
Q5: Does Xhorse Multi Prog require extra cable to read and write vehicle Immo module?
A: Yes, Xhorse solder-free adapters and cables are required, such as Item No.SK358 for BMW, Volvo, Porsche, Landrover, Honda, Kia, Hyundai, and Item No.HKSK372 for Audi BCM2.
Q6: Does Multi- prog need MQB48 activation license, and work with VVDI2 programmer?
A: Multi-prog programmer comes with MQB48 license, only need to bind with your Xhorse VVDI2/ Key Tool Plus account, and then the MQB48 function can be used on device normally.
Q7: Multi Prog programmer connects to computer via network cable cannot recognize device, but it works normally when connected with USB cable. What’s the problem?
A: Set up the IP address automatically, and plug the cable again. If it still fails, use USB cable first and the problem will be resolved by Xhorse team soon.
Q8: Can Godiag GT100+ work with Multi- Prog?
A: Yes.
Xhorse Multi-Prog Programmer ECU Programmer will be in stock after about 2 weeks on uobdii.com. If you’re interested in it, you can pre-order it now.
https://www.chinaobd2.com/vp-xhorse-multi-prog.html
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!