What is Launch X431 ECU & TCU Programmer?

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Launch X431 ECU & TCU Programmer is a new ECU clone tool. It can work with PC software to read, write, and clone ECU & TCU, no need X-prog3 or X431 tablet.

Features:

Read & write ECUs Data.

Support two methods to read various vehicle brand ECUs info.
Support Read the chip ID and Back up the EEPROM data.
Support Back up the FLASH data and Restore EEPROM/FLASH data.

Support Data Processing, anti-theft shutdown, and file verification.
Current adapter accessories:

X-PROG3 Adapter Cable 1 (DQ200XX)
X-PROG3 Adapter Cable 2 (VL381)
X-PROG3 Adapter Cable 3 (DQ380)
X-PROG3 Adapter Cable 4 (DQ250)
X-PROG3 Adapter Cable 5 (DL501)
X-PROG3 Adapter Cable 6 (DL382)
X-PROG3 Adapter Cable 7 (VGS-NAG3)
X-PROG3 Adapter Cable 8 (VGS2-FDCT/VGS-FDCT)
X-PROG3 Adapter Cable 9 (VGS3-NAG2)
X-PROG3 Adapter Cable 10 (8HP_V1(BMW/LR)/8HP_V2/8HP_V3)
X-PROG3 Adapter Cable 11 (MPS6)
X-PROG3 Adapter Cable 12 (DPS6)
X-PROG3 Adapter Cable Main Line (ML)

Highlights:

2D menu, clear and easy to choose
Powerful search function
Convenient modification of ECU data
USB communication, with a speed more than three times that of Android devices, making it more stable
Easy to copy data
Support engine data validation function

PC Software download link:

https://en.cnlaunch.com/products-detail/i-243.html

Click Download

Launch ECU & TCU Programmer Support List till June 2023:

ECU Name	ECU Type	ECU Brand	G3	FLEX
EDC16XX	ECM	Bosch	Support	Support
EDC17XX	ECM	Bosch	Support	Support
MD1CSXXX	ECM	Bosch	Support	Support
MD1CPXXX	ECM	Bosch	Support	Support
ME17.X.X	ECM	Bosch	Support	Support
MED17.X.X	ECM	Bosch	Support	Support
MED9.X.X	ECM	Bosch	Support	Support
MEV17.X.X	ECM	Bosch	Support	Support
MEVD17.X.X	ECM	Bosch	Support	Support
MG1CSXXX	ECM	Bosch	Support	Support
MG1CPXXX	ECM	Bosch	Support	Support
MSDXX	ECM	CONTINENTAL/SIEMENS	Support	Support
MSVXX	ECM	CONTINENTAL/SIEMENS	Support	Support
SDIX	ECM	Continental	Support	Support
GM EXX/TXX	ECM	DELCO	Support	Support
SIM271XX	ECM	Continental	Support	Support
SIMOS12.X	ECM	Continental	Not support	Support
SIMOS8.X	ECM	Continental	Support	Support
SIMOS-PCR2.X	ECM	Continental	Not support	Support
6HPXX	TCM	ZF	Support	Support
8HPXX	TCM	ZF	Support	Support
7DCT300	TCM	ZF	Support	Support
9G Tronic	TCM	Bosch	Support	Support
ALXXX	TCM	ZF	Support	Support
TCXX	TCM	Bosch	Support	Support
DPS6/DC4	TCM	GETRAG	Support	Support
DKG	TCM	GETRAG	Support	Support
DLXXX	TCM	Temic	Support	Support
DQXXX	TCM	Temic	Support	Support
MPS6	TCM	GETRAG	Support	Support
SPS6	TCM	GETRAG	Support	Support
VGSX	TCM	GETRAG	Support	Support
VL381	TCM	Temic	Support	Support
GM 6TXX/6LXX	TCM	DELCO	Support	Support
MEDG17.9.8	TCM	Bosch	Support	Support
MEG17.9.2	TCM	Bosch	Support	Support

X431 ECU & TCU Programmer connection diagrams (2 methods):

In bench mode:

Via gearbox adapter:

X431 ECU & TCU Programmer (PC version) vs. X-Prog3 + X431 Tablet:

Pros:

Work standalone with PC software. No need Launch GIII X-Prog3 key programmer and X–431 tablet.
Support VW Audi Porsche ECU cloning (the function is in the Data processing section).
The connection is more convenient.
It’s faster and more stable to read and write data (3x times faster than Android tablet).
It’s more convenient to process and transfer data on a PC.
PC software adds MEDC17 ECUs IMMO off

Cons:

Not support immobilizer and key programming. If you need to program keys, choose x-prog3 with x431 tablet.

NOTE:

X431 GIII is not recommended to be used with V+/Pros. It only adds the key programming function for German VAG, BMW and PORSCHE. These tablets only have Bluetooth interface, without USB interface, and cannot perform ECU TCU clone function. Only PAD V, PAD VII and IMMO tablets (X431 IMMO Elite/X431 IMMO Plus) can do ECU TCU CLONE.

How to use X-431 ECU & TCU Programmer and PC software:

2023 Launch X-431 ECU & TCU Programmer Standalone Cloning Device:

https://www.chinaobd2.com/vp-launch-x431-ecu-module-cloning-device.html

This Post: What is Launch X431 ECU & TCU Programmer? From ChinaOBD2 Official Blog
Please keep this link if you copy the post!