VW MQB R7F7014xx 5D Cluster Mileage Correction by Yanhua ACDP2

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Yanhua ACDP R7F701401/21-5D Interface Board is specially designed for VW MQB 5D cluster mileage correction. NO NEED soldering. Don’t need to remove resistors.

It can be used to work with Yanhua Mini ACDP2 and Module 34 with authorization. No need to buy new license.

Support models (not limited to):

Golf 8, Teramont, Viloran, Tavendor, Lamando, Tiguan L…

Support cluster numbers:

5GD920340A, 5GD920340C, 5HG920340, 5HG920340A, 5HG920340B, 5HG920340C, 5H0920340A, 3JD920340…

Supports chip models:

R7F701401, R7F701421

Mini ACDP Menu Path:

VW>> VW MQB IMMO (ODO)>> MQB48/49 ODO- Method 2 (R7F7014xx 5A/5C)>> R7F701401 (5D) or R7F701421 (5D)

Connection Method:

1.Find the Yanhua VW MQB R7F701401/21-5D Interface Board installation area on the instrument according to the visual positioning mark on the interface board, and remove two screws

2.Locate the D1, D2, D3, and D4 positioning holes correctly on the instrument panel

3.Accurately place the interface board into the installation area, align the D1 and D2 positioning points screw hole

4.Check the test point pin definition

5.Press down on the interface board, tighten the screws, and complete the installation