Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

VW Golf A6 Air Conditioner Shut Off By Itself After Work A While

Posted on February 24, 2019 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

A VW Golf A6 made 2012 with CFBA engine and DSG7 transmission,the owner feedback that the air conditioner work a while then shut off by itself.And is this article I will share this real case on How to solve VW Golf A6 air conditioner shut off automatically by itself trouble.

VW Golf A6 Air Conditioner Shut Off By Itself After Work A While

Trouble Analysis:

Scan the trouble codes of AC controller unit,read out DTCs:

000229 – refrigerant pressure upper limit exceeded.

 

According to the trouble codes hint,technicians check the data stream of AC controller and found the pressure of 08 AC controller unit up to 3.06 MPa.And check the data stream of ECU show that duty ratio of cooling fans up to 99.6%.

 

Follow the below ECU data stream,the cooling fans are not functioning correctly.Then technician tested the cooling fans and found them does not work occasionally.Consult the circuit diagram(show below), detected the cooling fans at load condition,the power supply normally but GND is unnormal.Then technicians found the resistance between T4x/4 and GND is too large.Consult the circuit diagram,this terminal is located on longitudinal beam 642 GND.

VW Golf A6 Air Conditioner Shut Off By Itself After Work A While

Trouble Solution:

Use weld gun to make the GND point better.

 

Repair Summary:

In this case,the AC trouble caused by poor GND of cooling fans.Then the cooling fans trouble result in AC system high pressure.Through the analysis of the trouble code,it determined that refrigerant pressure is too high,then power off the compressor.And analyse the data stream found the duty ratio of cooling fans is up to 99.6%,it is unnormal.So determined there are fault points exist in fans controller or its wire.Technician detect the power and GND of fans to located the real fault point quickly.

In this repair case,it warn us that the detection of controller and GND need at the load condition and wire connection position otherwise we will get the wrong result.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: VW Golf A6 Air Conditioner Shut Off By Itself After Work A While From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: How To Reset SRS Warning Light By Yourself
Next: Next: How To Install BMW Ediabas/INPA On Win XP/Vista

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Copy Sensor ID by Xhorse XTPMS Sensor and Key Tool Max Pro?
  • Yanhua ACDP2 Program BMW G Chassis BDC2 All Keys Lost on Bench
  • Scania Truck ALM 000800 Interrupted LIN Communicatin Siren
  • BMW G Series BDC2 Module Virgin and Replacement by APPRO2
  • CG FC200 V1.2.9.2 Update: BMW Coolant Temperature Setting Added

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2