Volvo VN Truck Sealing Strip Valve Cover Replace Guide

This instruction show you guide on how to replace sealing strip and valve cover for Volvo VN truck.Illustrations may differ slightly from the actual vehicle being serviced. However, key components addressed in this information are represented as accurately as possible.

 

Related Contents:

2022 Volvo PTT Premium Tech Tool PTT 2.8.150 & 2.7.116 Free Download

Volvo Vocom 88890300 Tool

Volvo Impact 2021 2019 EPC Parts Catalogue Free Download

 

Procedures:

1.Disconnect the connectors.

2.Loosen the screws.

3.Remove the frame.

4.Remove the gasket.

5.This step contains 2 alternatives.

Select one of the valid alternatives below.

Alternative 1 / 2

Remove the old sealant from the contact surfaces (A).

Note:Ensure that the surfaces are completely clean from sealant.

Note:Ensure that the sealant on the timing gear plate is not damaged (B).

Perform this procedure when the condition below is met.

 

Conditions

Timing gear plate without integrated sealing

?

Apply sealant.

Tech data Sealant, bead thickness 2 mm

Note:Use recommended sealant.

Note:Install the valve cover within 20 minutes of applying the sealant.

Perform this procedure when the condition below is met.

Conditions:Timing gear plate with integrated sealing

Apply sealant.

Tech data Sealant, bead thickness 2 mm

 

Note:Use recommended sealant.

Note:Install the valve cover within 20 minutes of applying the sealant.

Clean the contact surfaces carefully.

?Clean the groove.

Note:Ensure that the surfaces are completely clean from oil and grease.

Install the gasket

Note Use a new part.

Install the frame.

Torque tighten the screws.

Tightening torque

Lower valve cover, screw

Tightening sequence: 1-4 24

This Post: Volvo VN Truck Sealing Strip Valve Cover Replace Guide From ChinaOBD2 Official Blog
Please keep this link if you copy the post!