This article show a guide on how to use Volvo PTT to perform DPF service Regeneration for 2017 emission vehicle.And for more Volvo PTT projects,check here:Volvo Premium Tech Tool Projects
What You Need?
Volvo PTT Premium Tech Tool PTT 2.6.0.29 All Version Free Download
How to Install Volvo Premium Tech Tool PTT Software
Volvo Diagnostic Kit (88890300)
Procedures:
Connect Volvo PTT interface to vehicle,run Volvo PTT software.
Login with user ID and password
After vehicle identify,enter work order number,then click “Start Work”
Click “Test”
Volvo PTT will check preparations condition:
Reading user information
Reading product information
Checking operation support.This may take several minutes.
Operations valid for this product are being selected
After preparations checking,select “Engine,Engine mounting and equipment”–>”Inlet and exhaust system”–>”2589-08-03-02 Exhaust Aftertreatment System,Service Regeneration”
Then click “Start” button to continue
Tick “I have read and understand the above advisory” and then click “Continue” to proceed.
Click “DPF” and you can check the description at right filed
“A-2545-08-03 Diesel Particulate Filter Service Regeneration
This operation is used to perform a “service regeneration” of the diesel particulate filter (DPF)
During engine operation,the DPF becomes loaded with soot.Regeneration of the DPF take place during engine operation in order to remove the soot.
If the soot level becomes grater than what can be removed by the normally-occuming regeneration process,service regeneration may be needed.Service regeneration may also be needed to prepare the filter for ash cleaning.”
Click “Continue” to proceed
Tick the “Confirmed” and click “Continue” to proceed
Click “Play” button to start
Note:The process can be stopped at any point by selecting the stop button
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!