This article show a guide on how to use Volvo PTT to do parameter programming for Mack I II III.And if you want to get more project about Volvo projects,please check here:Volvo PTT Test Cases.
What You Need?
Volvo PTT Premium Tech Tool PTT 2.6.0.29 All Version Free Download
How to Install Volvo Premium Tech Tool PTT Software
Volvo Diagnostic Kit (88890300)
Procedures:
Connect Volvo PTT interface to vehicle and run Volvo PTT software and login in with your user ID and password.
Select “Manual Selection”
Select “Mack Trucks”,”V-MAC…”,”MACK” in the company section,then click “OK” to continue
Enter a work order number or select a recently used work order number in the list,here enter a work order number “test 2” and click “Start Work” to continue
Then select “Program”
If it prompt you with “Security Warming ” massage,please check the box “I accept the risk and want to run this ….” then click “Run” to continue
When Volvo PTT finish preparation checking,you will get below window
Select “Service and maintaining”–>”Parameter Programming”,then click “Start” button to process.
Warming massage,click “Start” to continue
Then click the “Start” button on the toolbar
If it will prompt you that the parking brake must be applied,check it and continue.
Now Volvo PTT will reading data from the control unit
Now you can click control unit to view the parameter values
Select value you want to change,and input a new value.
Here change “Cruse Max Vehicle Speed” of Cruise Control unit,from 65 to 63
Click “Continue”
And then click “Program”
Finally,you need to input vehicle ECU password to continue parameters programming.
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: program PTT Software
Related Posts
How to use Autel IM608 add a key for 2010 VW CC?
2023.04.13
How to Get Approval Password for CNH EST Programming
2023.09.1
Detroit GHG17 Engine Motor Control Module Removal and Installation Guide
2023.05.10
VW AUDI ODIS 4.33 Software for VAS 5054A and VAS6154 Free download+ FAQs
2019.09.24
Volvo PTT Export Sensor Values to Excel for Pre-2013OBD
2019.07.24
Volvo PTT Calibrate Electrical Unit Pump for Volvo MACK I II III
2019.06.17
Best key programmer: Obdstar DP Plus vs Lonsdor K518 vs Autel IM608
2019.12.16
WinOLS Disable/Close FAP and DPF for EDC16C34
2019.07.22
How to install gm mdi software
2024.01.28
2019 Latest CNC key cutting machine introduction
2019.02.25