Volvo PTT 2.03.20 Installation & Activation with 88890300 Vocom Interface?

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Step-by-step procedure on how to install and active Volvo PTT 2.03.20 which is supposed to compatible with Volvo 88890300 Vocom Interface.

Part 1: restore the software Volvo PTT 2.03

Volvo PTT 2.03 U disk version setup tips:

1. Prepare one piece of empty hard disk over 120G
2. Install well WIN7 OS in the empty hard disk.
3. Follow the following instruction to restore the software Volvo PTT 2.03 in the U disk.
4. Finish restoring the software, if the computer driver is not successfully installed, please use

   How useful was this post?

   Click on a star to rate it!

   Submit Rating

   Average rating / 5. Vote count:

   This Post: Volvo PTT 2.03.20 Installation & Activation with 88890300 Vocom Interface? From ChinaOBD2 Official Blog
   Please keep this link if you copy the post!

   Tags: 88890300 Vocom cat key program Vocom Volvo 88890300 wholesale wireless

   Related Posts

   

   Caterpillar Injector and Intake Valve Actuator Solenoid Test

   2024.08.26

   

   Unlock Version FVDI 2018 errors and solutions

   2019.03.5

   

   Fixed! bought Humzor NexzDAS Pro with IMMO but no display

   2020.05.7

   

   How to Reset Air Drier for Volvo FMX 440 by Volvo Tech Tool

   2023.04.4

   

   GM Tech 2 TIS2000 Dongle Installation guide

   2019.11.3

   

   Audi A6L/Q7 Steering Lock Module J518 Repair Guide

   2019.02.24

   

   Launch DIY Scanner CReader 8021 Full OBD2 diagnostic Scanner OBD+ABS+SRS+Oil+EPB...

   2018.12.17

   

   How to Renew Rear Oil Seals for Perkins 1000 Series Engine

   2023.04.3

   

   How to Cut Ford Transit FO21 TIBBE Key by Xhorse Dolphin XP-005 with M3 Clamp

   2023.04.2

   

   VIIPlusLoader V08.022.01(BETA)-FULL-Installer for VCDS V22.30

   2022.03.5