Volvo (2023- 2024) Read CEM Data by ICP with Yanhua ACDP2

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Yanhua Mini ACDP2 can read Volvo (2023-2024) CEM data by ICP now.

For Volvo 2022- 2023.6, need to use Yanhua ACDP Module 20 and Yanhua Volvo (2023-) CEM Interface Board.

For Volvo 2023.7- 2024, need to use Yanhua Volvo (2023-) CEM Interface Board and Volvo (2022-) IMMO License. (Note: New users need to buy IMMO license, but old customers who purchased IMMO License before, no need to buy extra, can buy new interface board only).

Yanhua Mini ACDP Volvo (2023 – 2024) CEM Interface Board Overview

1.Feature

Read VOLVO CEM

No need dismantle any chip or components

No soldering

No damage

No mark

Special interface board replaces welding, pins are intelligently detected, and data reading and writing are safe and reliable.

2.Supported Volvo models

Supports 2023-2024 Volvo S60 /S90/XC60 and Lynk&Co, etc

Volvo SPC5748G (Volvo-24) and SPC5748C (Link Co-23) are newly added.

How to use Yanhua Volvo (2023-2024) CEM Interface Board and Yanhua ACDP 2?

ACDP software/APP menu function path:

Volvo>> IMMO>> S60 (2022- ) or S90 (2022- ) or XC60 (2022- ) or Lynk Co option>> Read CEM data by ICP>> Select the car model supported

Volvo SPC5748G (Volvo-24) and ACDP2 connection method:

1.Prepare all accessories

2.Push the lock fastening of the interface board to the unlock position, find the interface board installation area on the CEM according to the visual positioning mark on the interface board.

3.Place the interface board against the CEM socket, and align with the three positioning holes

4.Test the Point Pin definition

5.Press down on the interface board, push the PCB lock buckle to the Locked position to lock the interface board, installation is done.

Overall connection diagram:

Volvo SPC5748C (Link Co-23) and Mini ACDP-2 connection method:

1.Prepare all accessories

2.Push the lock fastening of the interface board to the unlock position, find the interface board installation area on the CEM according to the visual positioning mark on the interface board.