The latest version vcdsloader for hex v2 udpated version has been updated, you can download from this link:
https://www.chinaobd2.com/service/VCDS-HEX-V2-plus-loader-free-download-7.html
HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface Support Multi-function Online Updated Version for Volkswagen Audi Seat Skoda
The HEX-V2 Enthusiast USB Interface works with VCDS (VAG-COM Diagnostic System) via USB turning a Windows PC into a factory level diagnostic tool for Volkswagen, Audi, Seat or Skoda automobiles.
Now the latest version Software is VCDS V21.9
If you need latest version HEX V2 loader, you can follow this link:https://www.chinaobd2.com/service/vcds-hex-v2-plus-loader-free-download-7.html
- Gain factory level access to all systems in cars from 1990 through the current model year
- Scan for and clear DTCs with 19,000+ fault codes decoded into plain text
- Alter settings through module coding accessible only by factory level tools
- Perform various country-specific modifications to your car (remove seat belt chime, enable gauge test/needle sweep, enable lap timer, operate windows and sunroof with remote, and much more)
- View and log live data
- Reset service reminder
- Perform built in tests and calibrations normally reserved for factory level tools
- Diagnose real failures instead of swapping parts!
Features:
- Fully licensed for VCDS software, acts as the key to unlock the software, no additional software purchase required
- VAG model year coverage: 1995 – Current model year (including 2016/2017)*
- Fast Operation – faster on CAN based models than our older generation wired products
- New improved car side connector increases durability and life
- New improved detachable/replaceable robust USB A to USB B cable, with a screw strain relief. USB wire has been improved to be more flexible, more durable.
- Incorporates all new design electronics with a new microcontroller to allow future expansion of capabilities
- Enhanced indicator lamps for wide visibility by the user
Product Support:
Support for configuration and VCDS-Mobile are provided via our Support Forum, in English only.
How to update the firmware of Hex V2
Before you update the Firmware of HEX V2, you need plug the HEX V2 interface to USB 3.0 port of your computer, then install the latest version VCDS software and VIIPlusLoader , run it as a administrator, turn off the antivirus softwares , such as AVG, McAfee, etc., Disable Windows Defender.
After update the firmware, you will be able to use the interface directly with English version VCDS.the other languages need to use by vcdsloader.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat Diagnostic System HEX V2 key Key Pro lish OBD2 Seat skoda VCDS
Related Posts
Mitsubishi ASA EPC Electronic Parts Catalogue Free Download
2019.07.13
How to Setup Communication for Doosan e-Doctor EDIA Software
2024.02.25
W215 2003 K-line diagnosis: DTS Monaco or Vediamo
2019.03.7
ZF-ASTRONIC Transmission Without ZF-Intarder Oil Change Guide
2023.06.13
Only US$65.99 VCDS VAG COM Diagnostic Cable HEX USB Interface Free Shipping to I...
2019.02.17
How to read keys of Nissan Altima 2019-2022 Smart Remote 5 Buttons 433MHz with S...
2024.02.4
Autocom CDP Pro “Unable to read” and “Firmware version not load” Solution...
2019.02.24
DiagBox Lexia 3 PP2000 Program New Keys for Peugeot 307 BSI
2019.02.28
Only US$64.99 VCDS VAG COM Diagnostic Cable HEX USB Interface Free Shipping to K...
2019.02.17
Microcat Ford Parts Catalog Free Download
2019.05.14
VIIPlusLoader-08.021.09-CN-Installer ;Can you send a copy thank you
hi i want to ask you about VCDS 20.9 i cant update firmware please can you tell me how can i interface or how can i regster vith VIIplusloader?