Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
In this article we flash the 5F controller for Golf 7 in order to unlock the speed index of the installed Discover PRO.
Preparations:
How to Install VCP System Diagnostic Tool Software
VCP System Professional Diagnostic Tool Software Download
Procedures:
Click the Guided Functions button in the Additional functions area of the main display.

In the Guided functions assistant please select Other, mark one of the listed options and confirm with NEXT Upload data from ZDC-Container

(Label / Descriptions when the language is set to GERMAN)

(Label / Descriptions when the language is set to ENGLISH)
As described in the requirements below: ignition of the car needs to be switched on, the motor must not be started. Confirm with NEXT.

Confirm again (NEXT) on the following screen

In the Config Data Uploader: click the Open Data button (1) to select and open the desired data.
Please note that you select the correct/appropriate file for the particular ECU (eg. Navigation or radio for VIM) the correct/appropriate file. You can find more detailed descriptions of the ZDC Container Files at: [email protected]


Next, select the appropriate ECU from the list: For all MQB (Audi A3 8V, Seat Leon 5F, Golf 7, Skoda Octavia 5E, Audi TT 8S) and MLB models (Audi A6 4G Facelift, Audi A7 4G Facelift, Audi A8 4H Facelift, Audi Q7 II) you have to select STG 5F
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts

John Deere Service Advisor 5.3.225 (replaces 5.2) Offline 2023 Construction and ...
2024.01.28

Scania SDP3 V2.64.3 Download link
2025.03.27

Original Handy Baby 2 II Key Programmer Hand-held Car Key Copy Key Programmer fo...
2018.12.17

What kinds of key cutting machine do you use?
2019.12.19

Using a Diagnostic Car Code Reader You Don
2019.02.27

Yanhua Mini ACDP program key on Land Rover KVM (MC9S12XEQ384 112Pin)
2019.04.9

(Solved) PCM Flash Crack Error: USB dongle is not available
2019.03.15

What is j2534 pass thru?
2019.06.3

SmartPRO 5000U-PLUS Programmer Support Unlock Car keys with NXP PCF79XX NCF29XX ...
2024.01.3
![[06.2022] Scania SDP3 2.52.1 Diagnosis & Programming Software Installation Service](https://blog.ecobd2.com/wp-content/uploads/2022/06/Scania-Diagnos-Programmer-3-2.52.1.jpg)
Scania SDP3 2.52.1 Diagnosis & Programming Software Installation Service
2022.06.15