VCP System DPF Adaptation for VW 2.0/2.7/3.0 TDi/VW Crafter

This article show a guide on how to use VCP system to adjust DPF after replacement for 2.0/2.7/3.0 TDi/VW Crafter.

Preparations:

How to Install VCP System Diagnostic Tool Software

VCP System Professional Diagnostic Tool Software Download

VCP System Perform DPF Emergency Regeneration for VW

Procedures:

Connect your VCP System interface to vehicle,and enter menu to select “Guided functions assistant”

Select “DPF” from right bar

Select “DPF Adaptation after replacement 2.0/2.7/3.0 TDi/VW Crafter”

Procedure adapts the motor controller after installing new DPF-Filter.Works on cars 2.0/2.7/3.0 TDi and VW Crafter with EDC16.

Warning:

Some 2.0TDI blueMotion models due to an error int he motor ECU software do not take the new adaptive value.The solution to this problem is to upgrade the software in engine ECU.

Conditions:

Ignition on

The engine is not running

Select car model/engine type

Now you need to enter mileage fro the last DPF-replacement

Procedure will be started

Turn on ignition

Don’t start the engine

After pressing “Next” the procedure will begin

Done!

This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. The main popular diagnostic tools for workshop are:Vag COM, VAS5054A, GM Tech2, iProg+ Programmer, Orange 5 programmer, Scania VCI3, etc.

This Post: VCP System DPF Adaptation for VW 2.0/2.7/3.0 TDi/VW Crafter From ChinaOBD2 Official Blog
Please keep this link if you copy the post!